Plaza PLZS11MBBN - Ignition AFX - Free user manual and instructions
Find the device manual for free Plaza PLZS11MBBN AFX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Gas grill ignition kit |
| Brand | AFX |
| Model | Plaza PLZS11MBBN |
| Product category | Ignition |
| Compatibility | Universal replacement for gas grills, fire pits and patio heaters |
| Ignition type | Piezo push-button spark generator |
| Power source | Mechanical, no battery or mains power required |
| Mounting type | Control panel or bracket mount with 32 mm hole |
| Main body material | Stainless steel with high-temperature resistant plastic |
| Dimensions | 65 x 40 x 25 mm |
| Net weight | 85 g |
| Ignition wire length | 50 cm |
| Spark gap | 4 - 6 mm between electrode and ground |
| Gas compatibility | Propane, butane and natural gas |
| Operating temperature | -20 °C to 60 °C |
| Protection rating | IP54 splash-resistant body |
| Main functions | Instant spark at the push of a button, easy replacement for worn igniters |
| Installation | Connects to electrode and ground, mounting nut included |
| Maintenance | Wipe electrode with a dry cloth, remove grease and debris |
| Safety features | High-voltage insulation, dead-man push button and weather-resistant cap |
| Spare parts and repairability | Electrode and wire can be replaced separately, compatible with standard grill ignition parts |
| Documentation | Free PDF user manual available on Notice-Facile |
Frequently Asked Questions - Plaza PLZS11MBBN AFX
How do I install the AFX Plaza PLZS11MBBN?
To install the AFX Plaza PLZS11MBBN, insert the ignition body through a 32 mm panel hole, tighten the mounting nut, connect the high-voltage wire to the electrode, and attach the ground wire to the burner frame. Press the push button to test the spark.
Does the Plaza PLZS11MBBN require batteries?
No, the AFX Plaza PLZS11MBBN uses a piezo crystal that generates a high-voltage spark mechanically. It needs no battery, USB charging or mains power.
Why is there no spark when I press the button?
If no spark appears, check the electrode gap (4 to 6 mm), make sure the wire is firmly connected, and clean the electrode tip. A damp or dirty electrode is the most common cause.
What is the correct spark gap?
The recommended spark gap for the Plaza PLZS11MBBN is between 4 and 6 mm, measured from the electrode tip to the metal burner or collector plate.
Is this ignition compatible with propane gas?
Yes, this ignition kit works with propane, butane and natural gas. The gas type does not affect the spark generation.
Can the ignition be used outdoors in bad weather?
The ignition body is designed for outdoor installations and has a splash-resistant housing, but you should protect it from prolonged heavy rain and direct water jets.
How should I clean the Plaza PLZS11MBBN?
Clean the electrode and porcelain insulator with a dry cloth. Remove cooked-on grease with a soft brush. Do not use abrasive cleaning pads or water sprays.
How long is the ignition wire?
The supplied ignition wire is 50 cm long, which is enough for most standard grills. If you need longer, use an approved high-voltage extension wire.
Is this a universal replacement part?
Yes, the AFX Plaza PLZS11MBBN is a universal replacement designed to fit most barbecue grills, fire pits, pizza ovens and patio heaters using a standard ignition electrode.
What does the user manual include?
The free PDF manual includes installation steps, safety warnings, maintenance advice and simple troubleshooting for the Plaza PLZS11MBBN.
User questions about Plaza PLZS11MBBN AFX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual Plaza PLZS11MBBN - AFX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Plaza PLZS11MBBN by AFX.