MCM110ST2P - Uncategorized StarTech.com - Free user manual and instructions
Find the device manual for free MCM110ST2P StarTech.com in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Media Converter (10/100 Mbps) |
| Model | MCM110ST2P |
| Brand | StarTech.com |
| Copper Interface | 10/100Base-TX (RJ45) |
| Fiber Interface | 100Base-FX (ST Duplex) |
| Fiber Type | Multimode |
| Maximum Distance | Up to 2 km |
| Data Transfer Rate | 100 Mbps |
| Network Standards | IEEE 802.3u, IEEE 802.3x |
| LED Indicators | Power, Link/Activity, FDX |
| Power Supply | 5V DC external adapter included |
| Dimensions | 70 x 60 x 20 mm |
| Weight | 100 g |
| Housing Material | Metal |
| Mounting | Desktop or wall-mountable |
| Installation | Plug-and-play, no software required |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity Range | 10% to 90% (non-condensing) |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety Instructions | Keep away from excessive heat and moisture |
| Spare Parts | Standard AC adapter and fiber cables are replaceable |
| Repairability | Limited disassembly; contact professional servicing |
| General Information | Converts copper Ethernet to fiber for extended network distances |
Frequently Asked Questions - MCM110ST2P StarTech.com
What is the StarTech.com MCM110ST2P used for?
The MCM110ST2P is a media converter that connects copper Ethernet (10/100Base-TX) to fiber optic networks (100Base-FX), allowing you to extend your network distance up to 2 km.
What is the maximum distance supported by this converter?
The maximum distance is 2 km over multimode fiber with ST connectors at 100 Mbps.
Does the MCM110ST2P require a separate power adapter?
Yes, an external 5V DC power adapter is included with the unit, plugging into a standard electrical outlet.
What do the LED indicators on the MCM110ST2P mean?
The LEDs indicate Power (unit is powered), Link/Activity (network connection activity), and FDX (full-duplex operation is active).
How do I connect the media converter?
Connect your RJ45 Ethernet cable from the switch or router to the copper port, and a multimode fiber cable with ST connectors to the fiber port. Then plug in the power adapter.
Is the MCM110ST2P plug-and-play?
Yes, it is plug-and-play. No software or drivers are needed; once connected, it automatically negotiates speed and duplex.
What type of fiber cable is compatible?
This converter uses multimode fiber with ST duplex connectors, typically 62.5/125µm or 50/125µm cable.
Can I use this converter with a 10/100 switch?
Yes, the 10/100Base-TX copper port is compatible with 10/100 Ethernet switches, hubs, or routers.
How can I troubleshoot a link failure?
Check the power LED, ensure both ends use compatible fiber connectors (ST) and same fiber type, verify the link LEDs, and try a different cable or port to isolate the issue.
Where can I download the MCM110ST2P manual?
The manual is available for free on notice-facile.com in PDF format. You can also visit the StarTech.com support page for additional resources.
User questions about MCM110ST2P StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MCM110ST2P - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MCM110ST2P by StarTech.com.
USER MANUAL MCM110ST2P StarTech.com
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : StarTech.com
Model : MCM110ST2P
Category : Uncategorized