BSC10II-UE - Printer Star Micronics - Free user manual and instructions
Find the device manual for free BSC10II-UE Star Micronics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Receipt Printer |
| Brand | Star Micronics |
| Model | BSC10II-UE |
| Connectivity | USB 2.0 and Ethernet (10/100 Mbps) |
| Print Method | Direct Thermal |
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 250 mm/s |
| Paper Width | 80 mm |
| Paper Diameter | Up to 80 mm OD |
| Auto Cutter | Yes (with partial/full cut) |
| Sensors | Paper-end, cover-open |
| Dimensions (W x D x H) | 190 x 145 x 145 mm (approx.) |
| Weight | 1.2 kg (approx.) |
| Power Supply | 24V DC external adapter |
| Main Functions | Receipt printing, barcode printing, logo printing |
| Maintenance | Clean print head with isopropyl alcohol |
| Safety | Overheat protection, energy-saving mode |
| Spare Parts | Print head, cutter blade, rollers, sensors |
| Repairability | Modular design, user-replaceable parts |
| General Information | Ideal for POS, retail, and hospitality |
Frequently Asked Questions - BSC10II-UE Star Micronics
How do I load paper into the Star Micronics BSC10II-UE printer?
Open the paper cover, insert a thermal paper roll of 80 mm width with the printable side facing down, and ensure the paper feeds correctly under the print head. Close the cover and tear off the excess.
How do I install the driver for the BSC10II-UE printer?
Download the latest printer driver from the Star Micronics website, run the installer, and select the appropriate USB or Ethernet connection. Follow the on-screen instructions to complete the setup.
What should I do if the printer does not print?
Check that the power cable is connected and the printer is turned on. Verify the interface cable is secure. Ensure the driver is properly installed and paper is loaded. If the LED is blinking, refer to the manual for error codes.
How do I clean the print head?
Turn off the printer, open the cover, and wait for the print head to cool. Use a cotton swab moistened with isopropyl alcohol to gently clean the head, then allow it to dry completely before closing.
What paper types are compatible with the BSC10II-UE?
The printer uses direct thermal paper rolls with a width of 80 mm and a maximum outer diameter of 80 mm. Ensure the paper is designed for thermal printing to avoid damage.
How do I connect the printer to my network?
Connect the printer to your router via an Ethernet cable. Use the IP address assigned by your network to configure the printer in the driver or software. You can also use the utility provided by Star Micronics.
What do the blinking LED indicators mean?
If the LED blinks at a steady rate, the paper cover is open or out of paper. A different pattern may indicate an Autocutter jam or communication error. Consult the user manual for detailed error codes.
How do I reset the BSC10II-UE printer to factory defaults?
Turn off the printer, press and hold the FEED button, then turn the printer on. Continue holding the button until the LED flashes, then release. This will restore factory settings.
Can I use the BSC10II-UE with mobile devices?
The printer does not have built-in Bluetooth, but you can connect it to a mobile device using a USB host adapter or a network bridge. For mobile POS systems, consider using a Star Bluetooth accessory.
How do I replace the cutter blade?
Disconnect the power, open the paper cover, and remove the cutter unit. Unscrew the blade screws, carefully replace the blade, and reattach the unit. Always use genuine Star spare parts for safety.
User questions about BSC10II-UE Star Micronics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual BSC10II-UE - Star Micronics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSC10II-UE by Star Micronics.
USER MANUAL BSC10II-UE Star Micronics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Star Micronics
Model : BSC10II-UE
Category : Printer