AC S260 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free AC S260 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Loudspeaker |
| Brand | RCF |
| Model | AC S260 |
| Configuration | 2-way bi-amplified |
| Woofer Size | 12 inches |
| Tweeter Size | 1 inch compression driver |
| Power Output (RMS) | 260 Watts |
| Frequency Response | 50 Hz - 20 kHz |
| Maximum SPL | 125 dB |
| Input Impedance | 20 kΩ balanced |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions (H x W x D) | 600 x 380 x 320 mm |
| Weight | 14.5 kg |
| Enclosure Material | Polypropylene composite |
| Grille | Steel with acoustic transparent foam |
| Mounting | 35 mm pole socket, M8 flying points |
| Input Connectors | Combo XLR/TRS, RCA |
| Output Connectors | XLR link output |
| Controls | Volume, HF level, LF level, EQ |
| Protection Features | Thermal, overload, RMS limiting |
| Cleaning | Wipe with soft dry cloth |
| Spare Parts Availability | Genuine RCF parts via authorized service |
| Documentation | User manual in PDF from notice-facile.com |
Frequently Asked Questions - AC S260 RCF
How do I connect the RCF AC S260 to a mixer?
Use a balanced XLR cable from the mixer's output to the combo XLR/TRS input on the speaker. Set the mixer's output level to unity and adjust the speaker's volume control gradually.
Can I use the AC S260 as a floor monitor?
Yes, the AC S260 has a 45° monitor angle molded into the enclosure. Place it on the floor with the woofer facing the performer and adjust the HF level for clear monitoring.
What is the recommended height for pole mounting?
Insert the speaker onto a 35 mm pole with the speaker at or slightly above ear level for the audience. Ensure the pole is rated for the speaker's weight and secure the setup against tipping.
How do I avoid feedback when using a microphone?
Position the microphone behind the speaker, reduce the speaker's volume, and use a graphic equalizer to cut frequencies in the 200-400 Hz range. Maintain a distance of at least 3 feet between the mic and the speaker.
What is the optimal room size for a pair of AC S260 speakers?
A single AC S260 covers about 100 square meters for speech, while a pair can handle moderate music amplification up to 200 square meters with suitable subwoofer support for bass-heavy music.
Can I connect the AC S260 to a subwoofer?
Yes, connect the mixer's full-range output to the subwoofer, then use the subwoofer's high-pass output to the AC S260. Alternatively, use the speaker's internal crossover by setting the EQ switch to 'Sub'.
How do I clean the speaker grille?
Remove the grille by gently pulling it off. Wash it with mild soap and water, rinse thoroughly, and let it dry completely before reattaching. Do not use abrasive cleaners on the enclosure.
What does the 'LF' control do?
The LF (Low Frequency) control adjusts the bass output level. Rotate clockwise to boost low frequencies for music, or counterclockwise to reduce boominess when placed near walls.
Is the AC S260 suitable for outdoor events?
Yes, the AC S260 can be used outdoors if protected from direct rain and excessive moisture. The enclosure is weather-resistant but not waterproof. Use a cover or place under a canopy.
Why is there no sound coming out of the speaker?
Check that the power cable is connected and the power switch is on. Ensure the input signal is present and the volume knob is turned up. Inspect the cables for damage and try a different input source.
User questions about AC S260 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual AC S260 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC S260 by RCF.