DS-2CD2132F-S - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD2132F-S Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Brand | Hikvision |
| Model | DS-2CD2132F-S |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 3 Megapixels (2048 × 1536) |
| Lens | Fixed 4mm lens, F2.0 |
| Night Vision | IR LEDs, up to 30m range |
| Video Compression | H.264 / MJPEG |
| Power Supply | 12V DC or PoE (IEEE 802.3af) |
| Dimensions | Approx. 157 × 75 × 70 mm |
| Weight | Approx. 0.75 kg |
| Weatherproof Rating | IP66 |
| Operating Temperature | -30°C to +60°C |
| Main Functions | Motion detection, tamper alarm, remote monitoring, ONVIF support |
| Maintenance & Cleaning | Clean the lens with a soft dry cloth; inspect cables and mountings regularly |
| Security | Password protection, user access levels, HTTPS encryption, IP filtering |
| Spare Parts & Repairability | Professional installation recommended; user-serviceable parts limited; contact certified technicians for repairs |
| General Information | Wired Ethernet connection; includes mounting bracket and cap; firmware upgradable via web interface |
Frequently Asked Questions - DS-2CD2132F-S Hikvision
How do I reset the DS-2CD2132F-S camera to factory defaults?
Press and hold the reset button on the camera for approximately 10 seconds, or navigate to the web interface under Maintenance and select Factory Default. This restores the camera to its original settings.
What is the default IP address of the camera?
The default IP address is 192.168.1.64. Use the Hikvision SADP tool to scan the network and locate the camera if it does not respond.
Can I access the camera remotely over the internet?
Yes, you can configure port forwarding on your router to access the camera via its WAN IP, or enable the Hik-Connect cloud service for a simpler secure remote connection.
Does the camera support Power over Ethernet (PoE)?
Yes, the camera supports PoE IEEE 802.3af, allowing power and data to be delivered through a single Ethernet cable.
What is the maximum resolution and frame rate?
The camera delivers up to 3 megapixels (2048×1536) at 20 frames per second. At lower resolutions, higher frame rates are available.
Is the camera suitable for outdoor installations?
Absolutely. The IP66 weatherproof rating ensures protection against dust and heavy rain, making it suitable for outdoor use.
How can I get the best night vision performance?
Keep the lens and IR LEDs clean and unobstructed. Adjust the IR intensity in the camera settings to prevent overexposure, and avoid placing the camera near reflective surfaces.
Can I use a microSD card for local storage?
No, the DS-2CD2132F-S does not have a microSD slot. Recording requires an NVR or compatible recording device.
Does the camera have built-in Wi-Fi?
No, this model is wired Ethernet only. You can add wireless connectivity using a Wi-Fi bridge or converter.
What video codecs does the camera support?
The camera supports H.264 and MJPEG compression. H.264 is recommended for efficient bandwidth and storage use.
User questions about DS-2CD2132F-S Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD2132F-S - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD2132F-S by Hikvision.
USER MANUAL DS-2CD2132F-S Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-2CD2132F-S
Category : Security Camera