BNC-50 - Security Camera FIRST ALERT - Free user manual and instructions
Find the device manual for free BNC-50 FIRST ALERT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | First Alert |
| Model | BNC-50 |
| Camera Style | Wired analog bullet camera |
| Image Sensor | 1/4" CMOS |
| Resolution | 700 TVL |
| Lens | 3.6mm fixed lens with 80° field of view |
| Min. Illumination | 0.1 Lux (color) / 0.0 Lux with IR |
| Night Vision | 12 IR LEDs, range up to 20 meters |
| Video Output | BNC composite video, 1Vpp 75Ω |
| Signal System | NTSC / PAL switchable |
| Power Supply | 12V DC / 4W max |
| Housing Material | Aluminum alloy with weatherproof coating |
| Weatherproof Rating | IP66 |
| Operating Temperature | -20°C to +50°C |
| Dimensions | Φ 70 × 200 mm (without bracket) |
| Weight | 0.65 kg |
| Mounting | Wall or ceiling bracket included |
| Connectors | Power pigtail + BNC video connector |
| Compatibility | Works with any standard CCTV DVR |
| Included Accessories | Mounting screws, DC power adapter, user manual |
| Maintenance | Clean the lens and housing with a soft dry cloth |
| Repairability | Modular design; parts available through service centers |
| Safety Certification | CE / FCC |
Frequently Asked Questions - BNC-50 FIRST ALERT
How do I connect the BNC-50 camera to a DVR?
Use a high-quality BNC cable to connect the camera's BNC output to the corresponding BNC input on your DVR. Make sure the power adapter is connected and the camera receives 12V DC.
Can the BNC-50 be used outdoors?
Yes, it has an IP66 weatherproof rating, so it can withstand rain, snow, and dust. Ensure the connections are properly sealed to prevent moisture ingress.
What is the night vision range of this camera?
The BNC-50 features 12 IR LEDs that provide clear black-and-white images up to about 20 meters in complete darkness.
How do I change between NTSC and PAL?
Open the camera housing to access the CVBS/NTSC/PAL switch located on the circuit board. Set it to the desired standard, then close the housing securely.
Why is the video output black and white?
The camera switches to black-and-white mode in low light conditions. This is normal and enhances sensitivity. If it stays monochrome during daylight, check the day/night selector setting.
Can I use this camera with a wireless system?
No, the BNC-50 is a wired analog camera that requires a BNC cable and power. If you need wireless, you will need a separate video transmitter.
How do I clean the camera lens?
Gently wipe the lens with a soft microfibre cloth. Do not use harsh chemicals or abrasive materials. For the housing, use a damp cloth and dry it completely.
Does the camera support audio recording?
No, the BNC-50 is video-only. It has no built-in microphone or audio output. If you need audio, consider using a separate microphone with your DVR.
What is the optimal mounting height?
We recommend mounting the camera at a height of 3 to 5 meters to get a good viewing angle while avoiding tampering. Adjust the bracket to aim the camera at the target area.
My camera has no picture. What should I check?
First, verify the power supply and that the LED is on. Next, inspect the BNC cable connections for any loose or damaged pins. Also check the DVR's input channel and ensure it is set to the correct mode (AHD/TVI/CVI/CVBS). If the camera still shows no image, test with a known-good monitor.
User questions about BNC-50 FIRST ALERT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual BNC-50 - FIRST ALERT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BNC-50 by FIRST ALERT.