BM3783SL/PK - Microphone Worten - Free user manual and instructions

Product Type	Wired Dynamic Microphone
Brand	Worten
Model	BM3783SL/PK
Polar Pattern	Cardioid
Frequency Response	50 Hz - 15 kHz
Sensitivity	-50 dB ± 3 dB
Impedance	600 ohms
Connector	6.35 mm (1/4") mono jack
Cable Length	3 m
Power Supply	Not required (passive)
Body Material	Metal alloy with steel mesh grille
Dimensions	25 × 5 × 5 cm (approx.)
Weight	320 g (approx.)
Built-in Controls	On/off switch
Compatibility	Audio mixers, PA systems, amplifiers with 6.35 mm input
Maintenance & Care	Clean grille with a soft brush; wipe body with a dry cloth
Safety Information	Do not expose to moisture or extreme temperatures; avoid drops
Spare Parts & Repairability	Replacement cable and grille may be available; repair by qualified personnel
Included in Box	Microphone, 3 m cable, user manual

Frequently Asked Questions - BM3783SL/PK Worten

How do I connect this microphone to my audio system?

Plug the 6.35 mm mono jack into a compatible input on your mixer, amplifier, or PA system. Ensure the microphone is switched on if it has an on/off toggle.

Does this microphone require batteries or phantom power?

No, this is a passive dynamic microphone that operates without batteries or external phantom power. Simply connect the cable to an input.

Can I use this microphone with a computer?

Yes, but you may need an adapter from 6.35 mm to 3.5 mm or an audio interface with a 6.35 mm input. Check your computer's microphone input compatibility.

How can I reduce feedback when using this microphone?

Keep the microphone at least 15-20 cm from speakers, speak directly into the front, and reduce the volume of nearby monitors. A cardioid polar pattern helps reject sound from the rear.

What is the proper way to clean this microphone?

Use a soft brush to gently remove dust from the grille, and wipe the body with a dry cloth. Avoid using liquids or abrasive cleaners.

Is this microphone compatible with karaoke machines?

Most karaoke machines have a 6.35 mm microphone input, so this mic should work. If your karaoke system uses XLR, you'll need an adapter or a different cable.

What is the polar pattern and why does it matter?

The microphone has a cardioid polar pattern, which captures sound primarily from the front while rejecting sounds from the sides and rear. This reduces background noise and feedback.

How should I handle the microphone to avoid distortion?

Speak or sing at a consistent distance of 5-10 cm from the grille, and avoid handling the grille directly. This prevents clipping and maintains audio clarity.

Can I replace the cable if it becomes damaged?

In many cases, the cable is detachable. If not, a qualified technician can replace the cable or solder a new connector. Check for spare parts availability for your model.

Does the microphone come with a stand adapter?

Typically, this microphone includes a stand adapter (a metal clip) that fits standard microphone stands. Additional adapters may be purchased separately.

USER MANUAL BM3783SL/PK Worten

Wireless & Bluetooth Function

Karaoke Function

Eco Mode

Imported, produced and distributed by: Importado, producido y distribuido por: Importado, produzido e distribuido por:

• Wireless & Bluetooth function
• Karaoke function
  • Eco Mode BM3783SL/PK

• Advance activity: 10 gm

- Bluetooth: 3.0

Expectancies

Iano no набra sondio.

tono. El indicator LED [4] as apagara

The full declaration is real-time at the following interest address:

of the European Parliament and of the Council of April 2014.

MICROPHONE BYBASSUPTAL IS IT COMPLIANCE WITH FINANCE 21 SALVEU

Medical hardware deliveries that this equipment (MELISS MULTICOUNT)

• Audio formats supported: HP3

• Charging power: 3 V / 1 A

• Speaker Power: 3 W

• Battery inside: 1200 mm

1. рознім

• Product size: 230 x 65 x 65 mm

• Active range: 10 m

• Bluetooth: 3JL

specification

TUNOS OU AO 17WA

de lured on betore a cable is connected, otherwise there

way to and that it is not delicate. The microporine needs to

For cable connection, check that the cable is plugged all the

connected and not far away.

For Bluetooth connection, check that the correct device is

Troubleshooting

Echo [3] level to halt.

your voice. For karaoke effect, it is recommended to set the

Adjusting the Lcno (3) will decrease or increase the eca of

adjusted on the dance that is playing the music.

on your choice. It will be able to access you to the quick

«dulufing the volume (1) will decrease or increase the volume

Tuning the microphone

next via cable to sing-along to music of your choice.

mode) and follow the steps in "Paring [Eubetooth] or Con-

Set the control button [2] to "Mic" (speaker and microphone)

(Karaoke)

Speaker and microphone mode

use the stocks

the steps in "Paint (Bluetooth) or Connect via cable to

Set the control button [2] to "BT" (speaker mode) and follow

Speaker mode

You can now use the microphone.

tooth convection.

once an audio cable is connected it will overcome any blue-

the June-in (Alux) [7] port and your device's port. Note that

[Speaker and microphons mode]. Connect an audio cable to

Set the control button [2] to "BT" (speaker mode) or "Mie".

connected, otherwise there will be no sound.

NOTE: The microphone needs to be turned on before a cable is

Connect via Aux-in cable

You can now use the microphone.

pared, the LED (4) will light up in blue.

If a password is asked for, enter July. Once the username is

nearly Bluetooth devices and choose library from the use.

Enable the Bluetooth connection on your device. Search for

(speaker and microphone mode).

Set the control button (2) to "BT" [speaker mode] or "Flic"

phone.

Keep your Bluetooth device within 1 meter from the micro-

Make sure the microphone is turned off.

Bluetooth Pariny

The LED (4) will then turn off

Set the control button (2) to "OFF" to turn off the microphone.

ring model in blue.

The LED (4) will light up [contact via Bluetooth] or blink [pa

[Speaker and microphone mode] to turn on the microphone.

Set the control button (2) to "BT" (speaker mode) or "Ric"

Power on / off

changing. Once it is fully charged the LED (4) will turn off.

USB charger. The LED (4) turns red when the microphone is

Connect the micro USB cable to the charging port [6] and a

the first time.

Please fully change the ball way before using the device for

Charge

旧

MUS

②

[1] [2]

Speaker

Volume (Microphone)

[Mic, 81, off]

Control Button

Micropion

Overview

Speaker Parts

'azuendde maou

My sincerely hope you will be satisfied when using your

descinded in this manual

Please read carefully the instructions and safety measures

a state use.

to simplify the use of the application as well as to guarantee

Laboratory tests. This instructions manual is provided

The quality of this application has been certified by several

Thank you for purchasing this product.

Dear client.

Wireless Bluetooth Microphone BMO30SULPK

N3