PDU08C13EU - Power Strip StarTech.com - Free user manual and instructions
Find the device manual for free PDU08C13EU StarTech.com in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Distribution Unit (PDU) / Rack Mount Power Strip |
| Model Number | PDU08C13EU |
| Brand | StarTech.com |
| Number of Outlets | 8 |
| Outlet Type | IEC 60320 C13 |
| Input Supply Voltage | 230V AC, 50/60Hz |
| Input Current Rating | 10A |
| Maximum Power Rating | 2300W |
| Input Plug Type | Schuko (CEE 7/7) plug |
| Cable Length | 3m |
| Form Factor / Mounting | Rack mount (1U) |
| Dimensions (W x H x D) | 445 x 44 x 89 mm (17.5 x 1.7 x 3.5 in) |
| Weight | 1.2 kg (2.6 lbs) |
| Housing Material | Cold-rolled steel |
| LED Indicator | Yes, power-on indicator |
| Overload Protection | Resettable fuse (10A) |
| Operating Temperature | 0°C to 45°C |
| Safety Certification | CE, RoHS |
| Maintenance and Cleaning | Unplug before cleaning; wipe with a dry, soft cloth. Do not use liquids or solvents. |
| Spare Parts and Repairability | No user-serviceable parts. For repairs, contact StarTech.com support. |
| General Information | 1U rack mount power distribution unit with 8 C13 outlets, ideal for IT equipment in server racks. |
Frequently Asked Questions - PDU08C13EU StarTech.com
What types of devices can connect to the PDU08C13EU?
The PDU08C13EU features 8 x IEC C13 outlets, making it compatible with servers, monitors, and networking equipment that use standard C14 power cords.
What is the maximum total load of this PDU?
At 230V AC, the maximum current rating is 10A, which gives a total capacity of 2300W. Ensure the connected devices do not exceed this limit.
How can I install the PDU in a rack?
The PDU has a 1U rack-mount design with pre-installed mounting ears. Align the ears with the rack rails and secure using M6 screws (not included).
Does the PDU provide surge or spike protection?
No, this unit is intended for power distribution only, not for surge protection. Use separate surge protective devices for connected equipment.
What is the length of the power cord?
The permanently attached power cord is 3 meters (9.8 feet) long with a Schuko plug for European wall sockets.
Why is the power LED not illuminated?
First, verify the Schuko plug is firmly inserted and the outlet is live. If it still doesn't light, check if the 10A resettable fuse has tripped; press to reset. If the problem persists, contact support.
Can I use the PDU with 110V power systems?
No, the PDU is rated for 230V AC only. Using it with 110V can produce inadequate power to outlets and may damage the unit.
Is it safe to mount the PDU in a fully enclosed rack?
Yes, but make sure the rack has adequate air ventilation to keep the PDU's operating temperature within 0°C to 45°C.
Can I plug a C14 male cable directly to the outlets?
Yes, each C13 outlet accepts a C14 male plug. Standard C13-to-C14 jumper cables are often used to connect devices.
How do I clean the PDU?
Disconnect the PDU from the power source first. Wipe the exterior with a dry, non-abrasive cloth. Do not use water, cleaners, or solvents.
User questions about PDU08C13EU StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Strip in PDF format for free! Find your manual PDU08C13EU - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU08C13EU by StarTech.com.
USER MANUAL PDU08C13EU StarTech.com
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : StarTech.com
Model : PDU08C13EU
Category : Power Strip