9321 - Proximity reader Dormakaba - Free user manual and instructions
Find the device manual for free 9321 Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Proximity Reader |
| Brand | Dormakaba |
| Model | 9321 |
| Operating Frequency | 125 kHz |
| Read Range | Up to 5 cm |
| Output Format | Wiegand |
| Power Supply | 5-12 V DC |
| Current Consumption | 30 mA typical |
| Dimensions (H x W x D) | 76 x 41 x 17 mm |
| Weight | 60 g |
| Color | White |
| Mounting Type | Wall mount |
| Operating Temperature | -20°C to +55°C |
| Ingress Protection | IP65 |
| Card Compatibility | EM4100 and compatible 125 kHz cards |
| Status Indicator | LED (red/green) |
| Connection Wires | 3 wires (power, data0, data1) |
| Casing Material | Polycarbonate |
| Maintenance | Clean with soft dry cloth |
| Safety | Read-only, no data storage |
| Repairability | Sealed unit, replace entire reader |
| General Information | Compact design suitable for indoor/outdoor use |
Frequently Asked Questions - 9321 Dormakaba
What is the read range of the Dormakaba 9321 proximity reader?
The typical read range is up to 5 cm depending on the card and installation environment.
How do I connect the 9321 reader to an access control panel?
Connect the power wires (5-12V DC) and the data wires (DATA0 and DATA1) to the corresponding Wiegand inputs on the panel.
Is the reader compatible with 125 kHz cards?
Yes, it supports 125 kHz EM4100 and compatible transponder cards.
Can the 9321 be mounted outdoors?
Yes, it has an IP65 rating, meaning it is protected against dust and low-pressure water jets.
What does the LED indicator show?
The LED typically shows red when idle and green when a valid card is read.
How far can the reader be from the control panel?
The maximum cable length depends on wire gauge, but generally up to 150 meters using 22 AWG twisted pair.
Does the reader require any configuration?
No, the 9321 is a plug-and-play reader with fixed Wiegand output. No DIP switches or programming needed.
Can I use this reader with HID cards?
No, it is designed for EM-compatible 125 kHz cards, not HID format cards.
How do I clean the reader?
Use a soft dry or slightly damp cloth to wipe the surface. Do not use solvents or abrasive cleaners.
What should I do if the reader fails?
Check the power supply and wiring. If it still does not work, the unit is sealed and should be replaced.
User questions about 9321 Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Proximity reader in PDF format for free! Find your manual 9321 - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9321 by Dormakaba.
USER MANUAL 9321 Dormakaba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : 9321
Category : Proximity reader