KPC-N701NUW - Security Camera KT&C - Free user manual and instructions
Find the device manual for free KPC-N701NUW KT&C in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | KT&C |
| Model | KPC-N701NUW |
| Image Sensor | 1/3" 700TVL CCD |
| Resolution | 700 TV Lines |
| Lens | 3.6mm fixed lens (or varifocal, estimated) |
| IR Range | Up to 30m (98ft) with IR LEDs |
| Weatherproof Rating | IP66-rated housing |
| Power Supply | 12V DC, 500mA |
| Dimensions | 220mm x 80mm x 80mm (approx.) |
| Weight | 1.2 kg (approx.) |
| Mounting | Ceiling or wall mountable bracket |
| Video Output | Composite video output (BNC connector) |
| Minimum Illumination | 0.01 Lux (color), 0.001 Lux (B/W) |
| Day/Night Mode | Auto-switching with external IR cut filter |
| Signal System | NTSC or PAL (switchable) |
| Maintenance | Clean the housing and lens with a soft dry cloth; check cable connections periodically |
| Safety | Install away from moisture and extreme temperatures; use correct power adapter |
| Spare Parts and Repairability | Contact KT&C support for genuine replacement parts; avoid disassembling the camera |
Frequently Asked Questions - KPC-N701NUW KT&C
How do I connect the KPC-N701NUW camera to a monitor or DVR?
The camera provides a composite video output via a BNC connector. Connect it directly to the video input of your DVR or monitor using a coaxial cable. Ensure the power supply is connected and matches the camera's voltage requirement (12V DC).
The camera's night vision is not working. What should I check?
First, verify that the camera is receiving power and that the IR LEDs are enabled. In complete darkness, the IR LEDs should activate automatically. Also check the day/night mode settings on the camera or DVR; if the camera is set to forced color mode, IR may not activate. Clean the IR LED area if dusty.
Can I use this camera outdoors?
Yes, the KPC-N701NUW is rated IP66, meaning it is dust-tight and protected against strong water jets. It is suitable for outdoor use when installed in a shielded position, but avoid exposing it to direct rainfall for extended periods without proper sun/rain shield.
What is the maximum cable distance for the video output?
For a quality RGBS signal, you can run a coaxial cable (RG59 or similar) up to 300 meters (about 1000 feet) without a signal booster. For longer distances, use an UTP transmitter or a signal amplifier.
How do I clean the camera lens?
Gently wipe the lens with a soft, lint-free cloth or a lens tissue. If necessary, use a small amount of lens cleaner. Avoid using harsh chemicals or abrasive materials, as they may damage the lens coating. Always disconnect power before cleaning.
Can I adjust the camera's viewing angle?
The camera comes with a fixed lens but has a factory-set bracket for proper alignment. You can rotate the camera body manually within its housing to some extent. For fine adjustment, loosen the pan/tilt screws on the mounting bracket, adjust the angle, and tighten them securely.
What power adapter should I use for this camera?
Use a regulated 12V DC power supply with a current rating of at least 500mA (0.5A). Connect the positive and negative terminals correctly. For outdoor installations, use a waterproof power connector or house the adapter in an IP-rated enclosure.
The image is blurry or distorted. What can I do?
Check the lens for fingerprints or dirt and clean it. Ensure the camera's focus ring (if present) is not accidentally rotated. If using a varifocal lens, adjust the zoom and focus rings until the image is sharp. Also verify that the cable connections are secure and not damaged.
Does this camera support audio?
The KPC-N701NUW is a video-only security camera; it does not have a built-in microphone or audio output. For audio monitoring, you would need a separate camera with audio capability or an external microphone tied to your recording system.
How do I perform a factory reset on this camera?
This analog camera does not have a factory reset function as it uses DIP switches or OSD menus for configuration. Typical adjustments (like backlight compensation, white balance) are made via the OSD menu. If you need to reset to defaults, look for a 'Reset' option in the OSD menu or consult the manual for the specific procedure.
User questions about KPC-N701NUW KT&C
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual KPC-N701NUW - KT&C and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KPC-N701NUW by KT&C.
USER MANUAL KPC-N701NUW KT&C
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KT&C
Model : KPC-N701NUW
Category : Security Camera