Tripp Lite

5P850GR - Inverter Tripp Lite - Free user manual and instructions

Find the device manual for free 5P850GR Tripp Lite in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Tripp Lite 5P850GR - page 8
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type UPS - Uninterruptible Power Supply
Model 5P850GR
Brand Tripp Lite
Power Rating 850 VA / 700 W
Topology Line-interactive
Output Waveform Pure Sine Wave
Input Voltage Range 160 - 280 V
Output Voltage 230 V nominal
Frequency 50/60 Hz
Transfer Time 2 to 4 ms typical
Battery Type Sealed lead-acid, user-replaceable
Battery Runtime at Full Load Approximately 3 minutes
Battery Runtime at Half Load Approximately 10 minutes
Recharge Time About 3 hours
Outlets 8 x IEC C13 outlets
Connectivity USB, RS-232, and optional SNMP slot
Dimensions (W x D x H) 170 x 340 x 280 mm
Weight 14.5 kg
Maintenance Keep vents clear; wipe with a dry cloth
Safety Do not open; qualified service only

Frequently Asked Questions - 5P850GR Tripp Lite

What is the battery runtime on the Tripp Lite 5P850GR?
The runtime depends on load. At half load, it typically provides about 10 minutes; at full load, about 3 minutes. This allows enough time for safe shutdown in an outage.
Can the battery be replaced?
Yes, the battery is user-replaceable. Purchased from authorized dealers, the replacement procedure is described in the manual. Always disconnect the UPS from power before replacing.
How do I connect devices to the 5P850GR?
It has 8 IEC C13 outlets. Connect equipment that needs backup power, such as servers, networking devices, or desktop PCs. Ensure total load does not exceed 700W.
Does the 5P850GR output pure sine wave?
Yes, it produces a pure sine wave, compatible with active PFC power supplies and sensitive electronics.
How do I install the software for management?
You can download software from the Tripp Lite website. It communicates via a USB or RS-232 port and provides monitoring and graceful shutdown.
How do I care for the UPS?
Place it in a clean, ventilated area away from direct sunlight and moisture. Wipe the exterior with a dry cloth. Avoid placing it near heat sources.
What is the transfer time?
The transfer time to battery is typically 2 to 4 ms, so connected devices generally do not notice the switchover.
Is the UPS safe for use in offices?
Yes, it has overload and short-circuit protection, and is designed to meet safety standards for office environments.
Can I connect a printer or laser printer?
It is not recommended: laser printers have high inrush current that may overload the UPS. For critical electronics, keep the load within rated power.
How do I know when the battery needs replacement?
Most Tripp Lite UPS units have an audible alarm and LED indicators. If runtime decreases significantly or alarms persist, replace the battery.

User questions about 5P850GR Tripp Lite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Inverter in PDF format for free! Find your manual 5P850GR - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5P850GR by Tripp Lite.

USER MANUAL 5P850GR Tripp Lite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Tripp Lite

Model : 5P850GR

Category : Inverter