N286-01GSX-MLC - Uncategorized Tripp Lite - Free user manual and instructions
Find the device manual for free N286-01GSX-MLC Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SFP (Small Form-factor Pluggable) Transceiver |
| Brand | Tripp Lite |
| Model | N286-01GSX-MLC |
| Connector Type | LC duplex |
| Fiber Mode | Multi-mode |
| Data Rate | 1 Gbps (1000Base-SX) |
| Wavelength | 850 nm |
| Maximum Distance | 550 m (on 50/125 µm multimode fiber) |
| Interface Standard | SFP MSA compliant |
| Hot-Swappable | Yes |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Power Consumption | Less than 1 W |
| Supply Voltage | 3.3 V DC |
| Dimensions | 56.5 x 13.4 x 8.5 mm (2.22 x 0.53 x 0.33 in) |
| Weight | Approx. 70 g (2.47 oz) |
| Warranty | Limited lifetime warranty |
| Compliance | IEEE 802.3z, RoHS, Class 1 laser |
| Main Functions | Connects switches, routers and servers to multimode fiber networks |
| Cleaning Instructions | Clean fiber connectors with lint-free wipes and isopropyl alcohol |
| Safety Warnings | Class 1 laser product; do not stare into beam |
| Repairability | No user-serviceable parts; replace unit if faulty |
Frequently Asked Questions - N286-01GSX-MLC Tripp Lite
What is the Tripp Lite N286-01GSX-MLC used for?
This SFP transceiver connects network devices like switches, routers, and servers to a multimode fiber network, providing high-speed 1 Gbps data transfer.
What type of fiber optic cable does it support?
It supports multimode fiber, typically with 50/125 µm or 62.5/125 µm core/cladding sizes, using an LC duplex connector.
Is the N286-01GSX-MLC hot-swappable?
Yes, it is hot-swappable, meaning you can install or remove it without powering down the host switch or router.
What is the maximum transmission distance?
On 50/125 µm multimode fiber, it can reach up to 550 meters. On older 62.5/125 µm fiber, the distance is typically around 220 meters.
Is this transceiver compatible with any switch?
It is MSA compliant, so it works with most gigabit Ethernet ports that accept standard SFP modules. However, always verify your device's supported vendor and model list.
How should I clean the fiber optic connectors?
Use a lint-free wipe with isopropyl alcohol to gently clean the end faces of the connectors. Avoid touching them and keep dust caps on when not in use.
What is the power consumption?
The module consumes less than 1 watt of power, making it very efficient for high-density network installations.
Does it support dual fiber?
Yes, it uses a duplex LC interface for simultaneous transmit (TX) and receive (RX) signals over two fiber strands.
What safety precautions should I take?
The device is a Class 1 laser product. Never look directly into the fiber ports or emitted light, and always use proper eye protection if needed.
Can I repair the transceiver if it fails?
No, the SFP module contains no user-serviceable parts. If it fails, replace it with a new unit. It's covered by Tripp Lite's limited lifetime warranty.
User questions about N286-01GSX-MLC Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual N286-01GSX-MLC - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-01GSX-MLC by Tripp Lite.
USER MANUAL N286-01GSX-MLC Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-01GSX-MLC
Category : Uncategorized