LT12560-UV - Ignition LYYT - Free user manual and instructions
Find the device manual for free LT12560-UV LYYT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ignition Device |
| Brand | LYYT |
| Model | LT12560-UV |
| Category | Ignition System |
| Material | Ceramic and Stainless Steel |
| Electrode Length | 125 mm |
| Cable Length | 60 cm |
| Thread Size | M6 x 1.0 |
| Spark Voltage | 15,000 V |
| Spark Gap | 3-5 mm |
| Insulation Resistance | >50 MΩ |
| Operating Temperature | -20°C to +200°C |
| Application | Gas grills, gas stoves, fireplaces |
| Mounting Type | Replacement or retrofit |
| Power Source | Piezo crystal |
| Safety Features | Water-resistant cap and high-voltage insulated cable |
| Maintenance | Clean electrode with a dry cloth; replace if worn |
| Compatibility | Replaces Universal LYYT LT series |
| Package Contents | 1 igniter with cable |
| Warranty | 1-year manufacturer warranty |
Frequently Asked Questions - LT12560-UV LYYT
Is the LYYT LT12560-UV compatible with all gas grills?
The LT12560-UV is designed as a universal replacement igniter. It fits most gas grills, stoves, and fireplaces with a standard M6 electrode mounting thread. Check the electrode length and cable length before installation to ensure a proper fit.
How do I install the LT12560-UV igniter?
Mount the igniter through the existing electrode hole and secure it with the included nut. Connect the cable to the piezo push-button or spark generator. Ensure the electrode gap is set between 3 and 5 mm from the burner for reliable ignition.
What voltage does the LT12560-UV generate?
The piezoelectric igniter produces a 15,000 V spark, which is strong enough to ignite natural gas, propane, or butane under normal conditions.
Does the LT12560-UV require batteries?
No, this model uses a piezo crystal that generates electricity when pressed. No batteries or external power source are needed.
How do I clean the LT12560-UV igniter?
Turn off the gas supply and allow the grill to cool. Wipe the electrode and ceramic insulator with a dry cloth or soft brush. Avoid using water or solvents, as they may damage the high-voltage insulation.
What should I do if the igniter stops sparking?
First, check that the cable is properly connected and the electrode is not damaged or sooty. Clean the electrode and adjust the spark gap to 3-5 mm. If the spark still does not appear, the piezo cartridge may need replacement.
Can I order spare parts for the LT12560-UV?
Yes, replacement electrodes and piezo cartridges are available from LYYT or authorized dealers. The product is designed to be repairable, extending its service life.
Is the LT12560-UV ignition device exposed to rain?
The high-voltage cable is insulated, but the electrode and piezo unit are not fully waterproof. Protect the ignition system from direct water exposure by keeping it under a hood or shield.
What is the maximum operating temperature?
The LT12560-UV electrode is made of ceramic and stainless steel, with a maximum operating temperature of 200°C at the electrode tip. The piezo mechanism should stay below 100°C for optimal performance.
How do I know if the LT12560-UV is compatible with my appliance?
Measure the existing electrode length and thread size. This model has a 125 mm electrode, an M6 thread, and a 60 cm cable. If your appliance uses similar dimensions, the igniter will likely fit without modification.
User questions about LT12560-UV LYYT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual LT12560-UV - LYYT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LT12560-UV by LYYT.
USER MANUAL LT12560-UV LYYT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LYYT
Model : LT12560-UV
Category : Ignition