82608 - Switch Steren - Free user manual and instructions
Find the device manual for free 82608 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-pole toggle switch |
| Brand | Steren |
| Model | 82608 |
| Voltage Rating | 120/250 V AC |
| Current Rating | 10 A |
| Switch Poles | Single-pole |
| Switch Throw | Single-throw |
| Mounting Type | Wall-mounted (standard junction box) |
| Material | Impact-resistant ABS plastic |
| Color | White |
| Dimensions (Approx.) | 3.5 × 2.5 × 2.0 cm |
| Weight (Approx.) | 50 g |
| Operating Temperature | -20 °C to 50 °C |
| Terminal Type | Screw terminals for solid/stranded wire |
| Protection Rating | IP20 (indoor dry locations) |
| Functions | On/off control for lighting and general electrical circuits |
| Maintenance | Wipe surfaces with a dry, lint-free cloth after disconnecting power |
| Safety | Complies with international electrical safety standards (e.g., UL/CE) |
| Repairability | Non-user-serviceable; replace the complete switch if defective |
| General Use | Indoor residential and commercial electrical installations |
Frequently Asked Questions - 82608 Steren
How do I install the Steren 82608 switch?
Turn off the circuit breaker at the electrical panel. Remove the old switch, identify the line and load wires, connect them to the two screw terminals on the 82608, and insert the switch into the wall box. Secure with screws and attach the faceplate.
Can I use this switch for both AC and DC circuits?
No, the Steren 82608 is rated for 120/250 V AC only. Using it on DC circuits can cause arcing and damage the internal contacts.
What is the maximum load this switch can handle?
The switch supports a maximum load of 10 amperes. At 120 V AC, that equals 1200 W; at 250 V AC, it equals 2500 W. Exceeding this rating may cause overheating.
Is the switch suitable for outdoor use?
No, the 82608 has an IP20 protection rating, meaning it is only safe for indoor dry locations. Outdoor installation requires a weatherproof box and an IP66-rated switch.
How do I know if the switch is compatible with my wiring?
The screw terminals accept solid or stranded copper wires from 14 AWG to 10 AWG. Always verify the voltage and current in your circuit do not exceed the switch's ratings.
Does the switch have an indicator light?
No, the Steren 82608 is a standard toggle switch without an integrated LED or pilot light. For a lit switch, consider a different model.
What tools are needed for installation?
You will need a flat-head screwdriver for the terminal screws, a Phillips screwdriver for the mounting screws, and a voltage tester to confirm power is off.
How do I clean the Steren 82608?
First, disconnect the power at the circuit breaker. Wipe the switch plate and the switch itself with a dry, soft cloth to remove dust. Do not use water, sprays, or abrasive cleaners.
Is the switch covered by warranty?
Steren provides a 1-year limited warranty against manufacturing defects. Keep the original receipt and contact Steren customer service for replacement options.
Can I use this switch with LED bulbs?
Yes, the 82608 is a mechanical switch and works with LED, incandescent, CFL, and halogen bulbs, provided the total wattage does not exceed the switch's rated load.
User questions about 82608 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual 82608 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 82608 by Steren.
USER MANUAL 82608 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : 82608
Category : Switch