H55iCafe - Motherboard ASROCK - Free user manual and instructions
Find the device manual for free H55iCafe ASROCK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | ASRock |
| Model | H55iCafe |
| Chipset | Intel H55 |
| CPU Socket | LGA1156 |
| Form Factor | Mini-ITX |
| Dimensions | 170 mm × 170 mm |
| Weight | 0.5 kg |
| Power Connectors | 24-pin ATX + 4-pin ATX 12V |
| Memory Slots | 2× DIMM |
| Maximum Memory | 8 GB DDR3 |
| Supported Memory Speeds | DDR3 1333/1066 MHz |
| Integrated Graphics | Intel HD Graphics (requires compatible CPU) |
| Expansion Slots | 1× PCIe 2.0 x16 |
| Storage Interfaces | 4× SATA 3.0 Gb/s |
| USB Ports | 8× USB 2.0 (4 rear, 4 via header) |
| LAN | Gigabit Ethernet 10/100/1000 Mb/s |
| Audio | 7.1-channel HD Audio |
| Back Panel Ports | PS/2, VGA, DVI, HDMI, USB, LAN, Audio jacks |
| BIOS | AMI 64Mb PnP Flash ROM |
| Cleaning | Use a dry, soft cloth; do not use liquids |
| Safety | Disconnect power before installation; use anti-static wrist strap |
| Spare Parts | Replaceable CR2032 CMOS battery |
| Repairability | Motherboard should be serviced by qualified personnel |
Frequently Asked Questions - H55iCafe ASROCK
Which processors are compatible with the ASRock H55iCafe?
The H55iCafe supports Intel Core i3/i5/i7 and Pentium processors for the LGA1156 socket. For integrated graphics, choose a CPU with Intel HD Graphics, such as Clarkdale-based Core i3 or Core i5-6xx series.
How much memory can the motherboard support?
It has 2× DDR3 DIMM slots supporting up to 8GB of dual-channel memory. Approved speeds are DDR3 1333/1066 MHz.
Does it have a built-in graphics output?
Yes, when paired with a CPU that has integrated graphics, the motherboard offers D-Sub, DVI, and HDMI outputs on the rear panel.
Can I install a discrete graphics card?
Yes, there is one PCIe 2.0 x16 slot for adding a dedicated graphics card or other expansion card.
How do I update the BIOS?
Download the latest BIOS from the ASRock website, save it to a FAT32 USB drive, and use the Instant Flash tool built into the BIOS setup to update.
What power supply do I need?
A standard ATX PSU with a 24-pin main connector and a 4-pin 12V CPU connector is required. For typical setups without a high-end GPU, a 300W to 400W PSU is enough.
How can I clear the CMOS if a setting is wrong?
Turn off the PC, remove the power cord, and move the CMOS jumper (labeled CLR_CMOS) to its cleared position for a few seconds, or remove and reinsert the CR2032 battery.
How many SATA devices can I connect?
It provides 4 SATA 3.0 Gb/s ports, allowing multiple hard drives or SSDs for storage.
Does the motherboard support dual-channel memory?
Yes, to enable dual-channel mode, install identical memory modules in both DIMM slots. They must be the same capacity, speed, and density.
What should I do if there is no display when powering on?
Check that the CPU power 4-pin connector is attached, the RAM is seated properly, and the monitor is connected to the correct output. If using integrated graphics, ensure the CPU supports it. Also verify no standoffs are short-circuiting the board.
User questions about H55iCafe ASROCK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual H55iCafe - ASROCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H55iCafe by ASROCK.