ESM18CRR-C1 - Air conditioner ELECTROLUX - Free user manual and instructions
Find the device manual for free ESM18CRR-C1 ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split air conditioner, wall-mounted indoor unit |
| Brand | Electrolux |
| Model | ESM18CRR-C1 |
| Cooling Capacity | 18000 BTU/h (5.28 kW) |
| Recommended Room Size | Up to 45 m² |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Cooling Power Consumption | 1650 W |
| Energy Efficiency Class | A++ |
| Indoor Noise Level | 38-45 dB(A) |
| Outdoor Noise Level | 55-60 dB(A) |
| Indoor Unit Dimensions (W×H×D) | 1000 × 320 × 230 mm |
| Outdoor Unit Dimensions (W×H×D) | 880 × 600 × 345 mm |
| Indoor Unit Weight | 12 kg |
| Outdoor Unit Weight | 35 kg |
| Main Functions | Cooling, Dehumidification, Fan, Sleep, Timer, Turbo |
| Air Direction Control | Vertical/horizontal adjustable louvres with remote control |
| Filter Type | Washable anti-dust filter |
| Maintenance Requirement | Clean air filter every 2 weeks; annual professional service recommended |
| Safety Features | Auto restart, overheat protection, anti-freeze protection |
| Spare Parts / Repairability | Filters, remote control, fan motors and condenser coils available; R32 refrigerant serviceable |
| Warranty | 2-year manufacturer warranty (varies by region) |
Frequently Asked Questions - ESM18CRR-C1 ELECTROLUX
How often should I clean the air filter in my Electrolux ESM18CRR-C1?
You should clean the air filter every two weeks during normal use. Remove the front panel, slide out the filter, rinse it with lukewarm water, dry it thoroughly and replace it. Regular cleaning ensures efficient cooling and better air quality.
What is the best temperature for cooling mode?
The recommended cooling temperature is between 24°C and 26°C. Setting the thermostat higher reduces energy consumption and prevents over-cooling. You can adjust the temperature using the remote control or the control panel on the indoor unit.
How do I set the timer to turn the air conditioner on or off automatically?
Press the 'TIMER' button on the remote control. The remote will display 'TIMER ON'; use the '+' and '-' buttons to set the desired turn-on time. Press 'TIMER' again to set 'TIMER OFF' and adjust the turn-off time. Confirm by pressing 'SET' or 'OK'. The unit will enter the programmed schedule.
Why is my air conditioner leaking water?
Water leakage can occur if the condensate drain pipe is blocked or if the unit is not properly inclined indoors. Check that the drain hose is not clogged and ensure the indoor unit is slightly inclined downwards to the outside. If the problem persists, contact a qualified technician to inspect the drain pan.
How can I switch between °C and °F on the remote control?
While the unit is off, press and hold the 'TEMP' button for about 5 seconds. The display should toggle between Celsius and Fahrenheit. This setting is stored for future use.
What should I do if the remote control stops working?
First, check if the batteries are drained; replace them with new ones. Ensure the remote is pointed directly at the receiver on the indoor unit and that no obstacles or direct sunlight interfere. If the remote still fails, reset it by removing the batteries and pressing all buttons for 3 seconds, then reinstall them.
My air conditioner shows an error code on the display. What does it mean?
Error codes vary by model. Common codes include E1 (temperature sensor fault), E2 (anti-freeze protection), etc. Refer to the troubleshooting section of the manual for a specific list, or try a reset: switch off the unit, disconnect power for 10 minutes, and restart. If the error persists, contact an Electrolux service center.
Can I use the air conditioner in dehumidification mode?
Yes, the ESM18CRR-C1 features a dehumidification mode. Press the 'MODE' button until the 'DRY' icon is displayed. The unit will automatically set to a low fan speed and remove excess moisture from the air. This is useful in humid climates without over-cooling.
Is a professional installation required?
Yes, a split air conditioner like this requires professional installation. A certified technician must handle the refrigerant lines, mount the indoor and outdoor units, and connect the electrical system. Improper installation can lead to performance issues, leaks, or safety hazards.
How do I reset my Electrolux air conditioner to factory settings?
Switch off the unit and unplug it from the power outlet. Wait for 10 minutes, then plug it back in and turn it on. For a deeper reset, press the 'RESET' button on the remote or use the recessed reset switch on the indoor unit (if available) with a pin. Consult the manual for the exact procedure.
User questions about ESM18CRR-C1 ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ESM18CRR-C1 - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESM18CRR-C1 by ELECTROLUX.
USER MANUAL ESM18CRR-C1 ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : ESM18CRR-C1
Category : Air conditioner