DEFINITIVE TECHNOLOGY

Disappearing DI 5.5S - Loudspeaker DEFINITIVE TECHNOLOGY - Free user manual and instructions

Find the device manual for free Disappearing DI 5.5S DEFINITIVE TECHNOLOGY in PDF.

📄 8 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice DEFINITIVE TECHNOLOGY Disappearing DI 5.5S - page 3
3 / 8
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type In-Wall Loudspeaker
Woofer 5.5-inch (14 cm) Polypropylene with rubber surround
Tweeter 1-inch (2.5 cm) Pure Aluminum Dome
Frequency Response 38 Hz - 20 kHz
Sensitivity 90 dB (2.83V/1m)
Impedance 8 Ohms
Power Handling 5 - 140 Watts per channel
Recommended Amplifier Power 10 - 100 Watts RMS
Cutout Dimensions 7.375 x 9.875 inches (187 x 251 mm)
Overall Dimensions 8.94 x 11.5 inches (227 x 292 mm)
Mounting Depth 3.5 inches (89 mm)
Weight 5.5 lb (2.5 kg) as individual speaker
Grille Ultra-thin, paintable, magnetic or snap-fit
Mounting System Adjustable clamping tabs for secure installation
Technologies BDSS (Balanced Double Surround System) woofer, Wave Plaque
Safety Turn off and disconnect amplifier before installation or wiring
Cleaning Wipe with a soft, dry cloth. Do not use water, solvents, or sprays.
Repairability No user-serviceable parts inside. Contact qualified personnel for repair.
Package Contents One speaker, grille, mounting template, owner's manual
Design Disappearing series for nearly invisible audio

Frequently Asked Questions - Disappearing DI 5.5S DEFINITIVE TECHNOLOGY

What is the cutout size for the Definitive Technology DI 5.5S?
The recommended cutout size is approximately 7.375 x 9.875 inches (187 x 251 mm). Use the included template for precise placement.
Can I paint the speaker grille?
Yes, the ultra-thin grille is paintable. Remove the grille, apply primer if needed, then spray paint in light coats to avoid clogging the perforations.
What power amplifier should I use?
The speaker handles 5 to 140 watts per channel. A receiver or amplifier delivering 10 to 100 watts RMS is recommended for optimal performance.
What impedance is the DI 5.5S?
It is an 8-ohm speaker, compatible with most home theater receivers and stereo amplifiers.
Is the DI 5.5S sold as a pair or single?
It is typically sold as a single speaker, so order two for a stereo pair.
How do I clean the speaker and grille?
Use a soft, dry cloth or a vacuum with a brush attachment to remove dust. Do not use water, solvents, or cleaning sprays as they may damage the components.
Can the DI 5.5S be installed in a bathroom or outdoor area?
No, the DI 5.5S is not weather-resistant. Use it only in dry indoor locations.
Is the tweeter adjustable?
Yes, the speaker features a pivotable tweeter so sound can be directed toward the listening area for better imaging.
What warranty does Definitive Technology provide?
Definitive Technology typically offers a 5-year limited warranty for in-wall speakers. Check your local dealer for full terms.
What is the recommended mounting depth?
The speaker requires a mounting depth of 3.5 inches (89 mm) from the mounting surface. Ensure there are no studs or wiring in the cutout area.

User questions about Disappearing DI 5.5S DEFINITIVE TECHNOLOGY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual Disappearing DI 5.5S - DEFINITIVE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Disappearing DI 5.5S by DEFINITIVE TECHNOLOGY.

USER MANUAL Disappearing DI 5.5S DEFINITIVE TECHNOLOGY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DEFINITIVE TECHNOLOGY

Model : Disappearing DI 5.5S

Category : Loudspeaker