AP1600R-E2(BI2) - Server ASUS - Free user manual and instructions
Find the device manual for free AP1600R-E2(BI2) ASUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mounted Server |
| Form Factor | 1U rack |
| Dimensions | 430 x 530 x 44 mm |
| Weight | 12 kg |
| Processor | Intel Xeon dual-core |
| Chipset | Intel E7520 |
| Memory | 4 DIMM slots, up to 16 GB DDR2 ECC |
| Storage | 4 x 3.5" hot-swap SATA/SAS bays |
| Networking | Dual Gigabit Ethernet controllers |
| Expansion | 1 x PCI Express x8 slot, 1 x PCI-X slot |
| Power Supply | 650W redundant 80 PLUS |
| Cooling | Redundant hot-swap fans with failover |
| Management | ASMB remote management with iKVM |
| Security | Chassis intrusion detection, power-on password |
| Operating System Support | Windows Server, Red Hat, SUSE Linux |
| Power Requirements | 100-240V AC, 50-60Hz |
| Operating Temperature | 10°C to 35°C |
| Cleaning Instructions | Dust filters and fans with compressed air |
| Repairability | Modular components, tool-less drive bay access |
| Certifications | FCC, CE, UL, RoHS |
Frequently Asked Questions - AP1600R-E2(BI2) ASUS
How do I reset the BIOS password?
To reset the BIOS password, power down the server, open the top cover, locate the CLR_CMOS jumper, and move it from pins 1-2 to pins 2-3 for a few seconds. Return the jumper to its original position and restart.
What type of memory does the AP1600R-E2(BI2) support?
This server supports DDR2 ECC Registered SDRAM at speeds of 533 or 667 MHz. It has four memory slots, supporting a maximum of 16 GB when installed in pairs.
How can I configure a RAID array during installation?
Enter the RAID configuration utility by pressing Ctrl+H when the controller BIOS appears during boot. Create your virtual disk, choose the RAID level, select the drives, and initialize the array.
How do I update the server firmware?
Download the latest firmware package from the ASUS support website, copy it to a bootable USB stick, and run the included flashing utility in DOS or EFI shell. Ensure the server is on a stable power source.
Can I replace the power supply without shutting down?
The redundant power supply is hot-swappable. Release the latch, pull the failed module out, and slide a new identical one in. The server continues running during the swap.
How do I access remote management through ASMB?
Connect the dedicated ASMB management port to your network, find the IP address via DHCP, and open it in a browser. Use the default credentials to access iKVM and console functions.
What diagnostic LEDs indicate a hardware fault?
The front side houses system status LEDs for power, network, and disk activity. A blinking red LED signals a failure. Refer to the chassis silkscreen for exact meanings.
Is it necessary to use ECC memory?
Yes, this server requires ECC Registered memory to prevent data corruption. Non-ECC desktop memory can cause errors and instability.
How often should I clean the server’s internal fans?
Clean the fans and heatsinks every 3-6 months depending on air quality. Use compressed air in short bursts to remove dust and maintain airflow.
What should I do if the server doesn't boot after adding a drive?
Re-seat the hard drive and check the backplane connection. Access the RAID BIOS to rescan the port, and verify the drive is recognized. If not, try another slot or drive.
User questions about AP1600R-E2(BI2) ASUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual AP1600R-E2(BI2) - ASUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP1600R-E2(BI2) by ASUS.
USER MANUAL AP1600R-E2(BI2) ASUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASUS
Model : AP1600R-E2(BI2)
Category : Server