PCAU48BT - Receiver Pyle - Free user manual and instructions
Find the device manual for free PCAU48BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Bluetooth Receiver |
| Brand | Pyle |
| Model | PCAU48BT |
| Power Output | 4 x 80 Watts MAX (4 x 30 Watts RMS) |
| Bluetooth | V2.1+EDR, with 30 ft range |
| Tuner | AM/FM with 30 station presets |
| USB Port | Yes, for MP3/WMA playback |
| SD Card Slot | Yes, for SD/SDHC cards |
| Aux Input | 3.5mm auxiliary input |
| Water Resistance | IPX6 marine-grade housing |
| Power Supply | 12V DC (negative ground) |
| Dimensions (W x H x D) | 7.5 x 2.4 x 6.0 inches |
| Weight | 3.1 lbs |
| Speaker Impedance | 4 ohms |
| Line Output | RCA line out for external amplifier |
| Display | LCD positive display |
| Remote Control | Wired remote control included |
| Care & Cleaning | Wipe with damp cloth; avoid submerging |
| Safety | Disconnect power before cleaning |
| Repairability | Service by certified technician; no user-serviceable parts |
| General Info | Built-in 4-channel amplifier |
Frequently Asked Questions - PCAU48BT Pyle
How do I pair my phone via Bluetooth?
To pair, press the Bluetooth button on the receiver to enter pairing mode. Then enable Bluetooth on your phone and select 'PCAU48BT' from the list. The receiver will confirm the connection with a tone.
Is the PCAU48BT waterproof? Can I use it on a boat?
Yes, the PCAU48BT is designed with an IPX6 waterproof rating, meaning it is resistant to splashes and waves. It is specifically built for marine environments, so it can be used on boats, docks, and other outdoor areas.
What is the maximum power output?
The PCAU48BT delivers 80 watts per channel (max power) across four channels, giving a total peak output of up to 320 watts. This is enough to power a full sound system on your vessel.
How do I connect external speakers?
Connect your speakers to the 4-channel speaker terminals on the rear panel. Make sure the speaker impedance is 4 ohms or higher. The receiver also has RCA line outputs if you want to connect an external amplifier.
Can I control the receiver from a wired remote?
Yes, the package includes a wired remote control that lets you adjust volume, change tracks, and switch sources from a remote location. This is especially useful on boats for convenience.
What audio formats are supported via USB/SD?
The USB port and SD card slot support MP3 and WMA files. Simply load your music onto a USB drive or SD card, insert it, and select the corresponding source on the receiver.
How do I set AM/FM presets?
Tune to the desired radio station manually, then press and hold the preset button (1-6) for about 3 seconds. The station will be saved. You can store up to 30 presets in total across AM and FM bands.
What is the impedance rating for speakers?
The PCAU48BT is designed to work with 4-ohm speakers. Using speakers with a higher impedance (such as 8 ohms) is also safe, but lower impedance (2 ohms) may cause overheating or damage.
How do I clean the receiver?
Disconnect the power first, then use a soft dry cloth to wipe the surface. If needed, slightly dampen the cloth with fresh water and mild soap. Do not use harsh chemicals or spray water directly onto the device.
Does it have an auxiliary input for non-Bluetooth devices?
Yes, there is a 3.5mm AUX input on the front panel. Use an audio cable to connect any device with a headphone jack, such as an MP3 player or smartphone with a wired connection.
User questions about PCAU48BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PCAU48BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PCAU48BT by Pyle.