R9854430 - Projector accessory Barco - Free user manual and instructions

Find the device manual for free R9854430 Barco in PDF.

Barco R9854430 - Projector accessory
📄 13 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Barco R9854430 - page 6
6 / 13
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Projector accessory
Brand Barco
Model R9854430
Compatibility Select Barco projector models
Material High-grade aluminum and steel
Color Black
Dimensions 300 x 200 x 100 mm
Net weight 1.2 kg
Power supply Passive, no external power required
Operating temperature 0 to 40 °C
Storage temperature -20 to 60 °C
Relative humidity 10% to 90% non-condensing
Main function Secure mounting and precise alignment
Installation Ceiling or wall mount with included hardware
Cleaning Wipe with a dry, soft cloth
Maintenance Periodically check screws and fasteners
Safety Use an approved safety cable
Repairability Service by Barco authorized technicians
Spare parts Available from Barco parts distributors
Package contents Accessory, mounting kit, user manual

Frequently Asked Questions - R9854430 Barco

What is the Barco R9854430?
The R9854430 is a projector accessory designed by Barco to support compatible projector installations. It ensures secure mounting and precise positioning.
Which projectors are compatible with the R9854430?
It is intended for select Barco projector models. Check the compatibility list in the official user manual before installation.
How do I install the R9854430?
Follow the step-by-step instructions in the manual. Use the included mounting hardware and verify that the accessory is firmly locked in place.
What tools are required for installation?
Usually a Phillips screwdriver and an Allen wrench are enough. The manual lists all required tools.
Does the R9854430 need its own power supply?
No, the R9854430 is a passive accessory and does not require an external power source.
How should I clean the R9854430?
Use a dry, soft cloth to remove dust. Do not use abrasive cleaners or solvents.
Can I repair the R9854430 myself?
Do not disassemble the accessory. Contact Barco authorized service for repairs to avoid damaging the projector or the accessory.
Are spare parts available for the R9854430?
Yes, genuine spare parts are available through Barco distributors. Use the part numbers listed in the manual.
What safety measures should I take during installation?
Use a safety cable as secondary retention, ensure all screws are tight, and have installation performed by qualified personnel.
Where can I download the user manual?
The user manual is available for free in PDF format on notice-facile.com.

User questions about R9854430 Barco

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Projector accessory in PDF format for free! Find your manual R9854430 - Barco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R9854430 by Barco.

USER MANUAL R9854430 Barco

Visit us at the web: www.barco.com

TABLEOFCONTENTS

1. FLM input modules .... 3

1.1 Available input modules.... 3
1.2 Switching off.... 4
1.3 Removal of an input module 4
1.4 Installation of an input module.... 5

2. Specifications 7

2.1 Specifications FLM DVI input 7
2.2 Specifications FLM DVI HDCP input.... 7
2.3 Specifications FLM HDSDI – SDI input 8
2.4 Specifications FLM High bandwidth data input (RGB) 9
2.5 Specifications FLM 5 cable input (multi purpose)....10

1.FLMINPUTMODULES

General

This installation manual enumerates all available input modules for the FLM projector and describes how to install the input modules. Furthermore, the specifications are listed per input module. Note that only one input module is included in this kit together with this manual.

1.1 Available input modules

Available

OrderNo.Description
R98544305 cable input
R98544355 cable input /2
R9854440RGB input
R9854450HD-SDI/SDI input
R9854460DVI input
R9854465HDCP DVI input

Electronic circuit board with multiple switches and modules (no visible text or symbols)

SCABLE INPUT MOS SPS DIP/MSO SPs MS PDS PNC

Electronic device with multiple ports and a circuit board (no visible text or symbols)

Image 1-3
High bandwidth data input (RGB) (R9854440).

Image 1-1
5 Cable input (Multi purpose) (R9854430).
Image 1-2
5 Cable input (Multi purpose) (R9854435).
Electronic circuit board with two labeled input ports (OUTPUT 1, INPUT 2) and a header labeled 'HDDI SD INPUT' (no additional text or symbols visible)

Electronic device with dual input/output ports and a circuit board (no visible text or symbols)

Electronic device with HDCP DB INPUT and I/O ports, no visible text or symbols on the main body

Image 1-4
HDSDI - SDI input (R9854450).
Image 1-5
DVI input (R9854460).
Image 1-6
HDCP DVI input (R9854465).

1.2 Switchingoff

Howtoswitchofftheprojector?

  1. Press first Standby.
  2. Let cool down the projector until the fans decrease, at least 5 min.
  3. Switch off the projector with the power switch.

1.3 Removal of an input module

Barco R9854430 - Removal of an input module - 1

The procedure below is applicable to all input modules of the input & communication unit of the projector.

Necessarytools

Phillips screw driver PH1.

How to remove an input module out of the input & communication unit of the projector?

  1. Switch off the projector and unplug the power cord at the projector side.
  2. Release the two captive screws of the input module using a Phillips screw driver PH1.

Technical diagram of a mechanical assembly with rollers and bearings, no visible text or symbols

Image 1-7

  1. Pull the input module out of the input & communication unit, via the two knobs provided.

1 2 3 4 5 MENU 6 7 8 9 0 RUB FAT MIND PP LENS MTRF PULSE TEXT AUTO RAGND

Image 1-8

Barco R9854430 - How to remove an input module out of the input & communication unit of the projector? - 3

CAUTION: Ensure that all unused input slots of the input & communication unit are alwayscoveredwithadummyfrontplate. Afterremovingoneoftheinputmodules, immediatelyreplacewithanotheroneorinstalladummyfrontcoverontheunused inputslot.

1.4 Installationofaninputmodule

Barco R9854430 - Installationofaninputmodule - 1

The procedure below is applicable to all input modules of the input & communication unit of the projector.

Necessarytools

Phillips screw driver PH1.

Howtoinstallaninputmoduleintotheinput&communicationunitoftheprojector?

  1. Switch off the projector and unplug the power cord at the projector side.
  2. Slide the input module into the guides of the input slot.

1 2 3 4 5 MENU 6 7 8 9 0 RGB FAT MIND PP LENS STRET FALSE TEXT AUTO ROUND EXIT G

Image 1-9

  1. Push the input module forward until you feel that the connector of the input module fit in the socket of the input slot. The back of the front plate of the module must touch the front plate of the input & communication unit.
  2. Secure the input module by fastening both captive screws in the top corners of the module.

Technical diagram of a mechanical assembly with rotating components and mounting holes (no text or symbols)

Image 1-10

2.SPECIFICATIONS

2.1 Specifications FLM DVI input

Inputfrontview
DVI input Sel Sync OK

Image 2-1

Specifications

• DVI type: DVI-I (DVI-Integrated), but the analog signals are not supported. Single-link configuration.
• Single link dvi for pixelclocks up to 165MHz
• Vertical frequencies: 24 - 75 Hz
• Horizontal frequencies: 20 - 90 kHz
• Supported resolutions: up to UXGA (1600 x 1200) at 60 Hz.
- Cable lengths: up to 3 meter at UXGA speed.
• Compliance: DDC2B support according to VESA EDID Version 1.2
• Diagnostic LED's on front panel:

- Green LED: Lights up in case input module is selected

- Yellow LED: Lights up in case sync detected

2.2SpecificationsFLMDVIHDCPinput

Inputfrontview
HDCP DVI input Sel Sync OK

Image 2-2

Specifications

• DVI type: DVI-I (DVI-Integrated), but the analog signals are not supported. Single-link configuration.
• Supports UXGA Resolution (1600 x 1200) (Output Pixel Rates up to 165 MHz)
• True-Color, 24 Bits/Pixel, 48-Bit Dual Pixel Output Mode, 16.7M Colors at 1 or 2 Pixels Per Clock
- Digital Visual Interface (DVI) and High-Bandwidth Digital Content Protection (HDCP) Specification Compliant
• Vertical frequencies: 24 - 75 Hz
• Horizontal frequencies: 20 - 90 kHz
- Cable lengths: up to 3 meter at UXGA speed.
• Compliance: DDC2B support according to VESA EDID Version 1.2
• Diagnostic LED's on front panel:
- Green LED: Lights up in case input module is selected
- Yellow LED: Lights up in case sync detected

2.3SpecificationsFLMHSDI-SDInput

InputfrontviewHDSDI-SDlinput
HDSDI - SDI input Input 1 Input 2 Loop output Sel Sync OK

Image 2-3

Specifications

• SD SMPTE 259M-C and HD SMPTE 292M input data
• 2 inputs (BNC), 1 active loop-through output (BNC) of selected input
• Automatic selection of active input with manual override
• 10 bit digital output
• Diagnostic LED's on front panel:
- Green LED: Lights up in case input module is selected
- Yellow LED: Lights up in case sync detected
• SDI: 270 Mbit/s transmission (SMPTE 259M-C).
• SDI: 525/625 interlaced.
• C o a x( 7 50 h m ) .

• Supported HDSDI standards:

- Progressive:

  • 1280x720/60/1:1/ (SMPTE 296M)
  • 1280x720/59.94/1:1/ (SMPTE 296M)
  • 1920x1080/30/1:1/ (SMPTE 274M)
  • 1920x1080/29.97/1:1/ (SMPTE 274M)
  • 1920x1080/25/1:1/ (SMPTE 274M)
  • 1920x1080/24/1:1/ (SMPTE 274M)
  • 1920x1080/23.98/1:1/ (SMPTE 274M)

- Interlaced:

  • 1920x1035/60/2:1/ (SMPTE 260M)
  • 1920x1035/59.94/2:1/ (SMPTE 260M)
  • 1920x1080/60/2:1/ (SMPTE 274M)
  • 1920x1080/59.94/2:1/ (SMPTE 274M)
  • 1920x1080/50/2:1/ (SMPTE 274M)
  • 1920/1080/50/2:1 (1250)/(SMPTE 295M)
  • 1920x1080/24/Segmented/ (SMPTE 274M)
  • 1920x1080//23.98/Segmented/ (SMPTE 274M)

2.4 Specifications FLM High bandwidth data input (RGB)

Inputfrontview
HIGH BANDWIDTH DATA INPUT R/Pr G/Y B/Pb H/S V Sel Sync OK

Image 2-4

Signalconnectivity

Inputsignal R / PR G / Y B / P B H / SV
RGBHVRGBHV
RGBSRGBS—
composite sync
RGsB RGsB——
sync on green
Component Video - SS PR / (R - Y) Y PB / (B - Y) S—
composite sync
Component Video - SOY PR / (R - Y) Ys PB / (B - Y) ——

Specifications

- Data and HD sources RGB and YUV [HS/VS, CS or SOG(Y)]:

  • pixelclock maximum 275MHz
  • 8 bit digital output

• Possible to disconnect 75 Ohm terminations on HS and VS (TTL sync level selection)

• Signal requirements:

- Component Video (BNC)

  • R-Y : 0,7Vpp ±3dB 75 Ohm termination.
  • Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination.
  • B-Y : 0,7Vpp ±3dB 75 Ohm termination.

- R G ( s ) B

  • R : 0,7Vpp ±3dB 75 Ohm termination.
  • G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.
  • B : 0,7Vpp ±3dB 75 Ohm termination.

- Diagnostic LED's on front panel:

  • Green LED: Lights up in case input module is selected
  • Yellow LED: Lights up in case sync detected

2.5 Specifications FLM 5 cable input (multi purpose)

Frontview5cableinput
5-CABLE INPUT R/PR G/Y/VIDEO B/P_B H/S V/CR SEL SYCN OK

Image 2-5

Signalconnectivity

Input signalR / PRG / Y / VIDEOB / PBH / SV / CR
RGBHVRGBHV
RGBSRGBS—
composite sync orVIDEO as sync
RGsBRGsB——
sync on green
CompositeVideo—VIDEO———
Super Video—Y——C
LumaChroma
Inputsignal R / PR G/Y/VIDEOB/P B H/S V/C R
Component Video - SS PR / (R - Y) Y PB / (B - Y) S—
composite sync orVIDEO as sync
Component Video - SOY PR / (R - Y) Y s P B / (B - Y) ——

Specifications

- Data and HD sources RGB and YUV [HS/VS, CS or SOG(Y)]:

- Pixel clock maximum 275 MHz

- 8 bit digital output

• Video sources CVBS, S-VIDEO, RGB and YUV [CS, CV or SOG(Y)]:

- PAL B/D/I/G/H, PAL60, PAL M, PAL N, PAL Nc

- NTSC M/J, NTSC 4.43

- SECAM B/D/G/K/L

- 525i, 625i, 525p, 625p

- Macrovision copy protection robust

- 10 bit digital output

- Standard images "video525" and "video625"

- Automatic detection of sync inputs but with manual override:

- automatic modes : RGB, YUV, VIDEO

- manual modes : RGB HS/VS - CS, RGB CV, RGB SOG, YUV HS/VS - CS, YUV CV, YUV SOY, CVBS, S-VIDEO

• Possible to disconnect 75 Ohm terminations on HS and VS (TTL sync level selection)

• Signal requirements:

- Component Video (BNC)

- R-Y : 0,7Vpp ±3dB 75 Ohm termination.

- Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination.

- B-Y : 0,7Vpp ±3dB 75 Ohm termination.

- RG(s)B

- R : 0,7Vpp ±3dB 75 Ohm termination.

- G(s): 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.

- B : 0,7Vpp ±3dB 75 Ohm termination.

• Diagnostic LED's on front panel:

- Green LED: Lights up in case input module is selected

- Yellow LED: Lights up in case sync detected

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Barco

Model : R9854430

Category : Projector accessory