C 3100W - Microphone Clockaudio - Free user manual and instructions

Brand	Clockaudio
Model	C 3100W
Product Type	Condenser Gooseneck Microphone
Category	Microphone
Polar Pattern	Cardioid
Frequency Response	50 Hz - 18 kHz
Sensitivity	-38 dB ± 3 dB (at 1 kHz)
Output Impedance	200 Ω
Power Supply	48V Phantom Power
Connector	XLR 3-pin
Mounting Type	Flange / Desk Mount
Gooseneck Length	310 mm
Color	White
Weight	120 g
Cable Length	1.5 m
Max SPL	130 dB
Signal-to-Noise Ratio	70 dB
Application	Conferencing, Broadcast, Stage
Material	Brass and Steel
Included Accessories	Windscreen, Mounting Flange

Frequently Asked Questions - C 3100W Clockaudio

What type of microphone is the Clockaudio C 3100W?

The C 3100W is a condenser gooseneck microphone designed for professional speech pickup in conferences, meetings, and broadcast applications. Its cardioid polar pattern helps isolate the speaker's voice from ambient noise.

Does the C 3100W require phantom power?

Yes, this microphone is powered by 48V phantom power, which is supplied by most mixers, audio interfaces, and preamps. Make sure phantom power is enabled before use.

How do I connect the C 3100W to a mixing console?

Connect the microphone's XLR output to an XLR mic input on your mixer or preamp. Use a quality XLR cable and ensure phantom power is on for the respective channel.

What is the recommended speaking distance?

For optimal sound, position your mouth about 10 to 20 cm from the microphone. Avoid speaking directly into the capsule to reduce plosives and sibilance.

Can the gooseneck be bent and adjusted?

Yes, the C 3100W features a flexible gooseneck that allows you to adjust the angle and position of the capsule for optimal pickup.

How should I clean and maintain the microphone?

Use a soft, dry microfiber cloth to wipe the exterior. Avoid liquids and solvents. For the capsule, use a dry brush or compressed air to remove dust, and always store it with the windscreen on to protect it.

Is the C 3100W cardioid polar pattern suitable for multiple speakers?

The cardioid pattern is most sensitive to sound from the front and rejects sound from the rear, making it ideal for a single speaker. For multiple speakers, use separate microphones.

Can I use this microphone with a wireless system?

The C 3100W has a wired XLR connection and is not designed for wireless conversion. If you need wireless, you would need a wireless gooseneck from Clockaudio's other lines.

What type of input connector does the microphone have?

It uses a professional 3-pin XLR male connector, which is standard in most audio gear. A female XLR cable is required to connect it.

Does the microphone come with a warranty?

Clockaudio products are covered by a manufacturer's warranty against defects in materials and workmanship. Check with your retailer or Clockaudio's official website for the specific warranty duration and terms.

USER MANUAL C 3100W Clockaudio

Slim Line Series Cardioid Microphones with Mini XLR Connector designed for use in boardrooms, conferencing and a wide variety of applications requiring easily detachable gooseneck microphones with good consistent sound quality.

• Semi Rigid goosenecks or Rigid shaft
• Slimline unobtrusive design
  ■ Engineered in high quality brass
• Mini XLR connector for easy interchange
  ■ Cardioid condenser microphone
  ■ C3 series wideband quality
• Easy connection to SM20-RF, SM80-RF and SM80S-RF shock mounts, PPA-RF, S140-RF or CW9004 wireless microphone base
  ■ Finished in satin black

SPECIFICATIONS

Type:	Condensor (black electret)
Polar Pattern:	Cardioid
Frequency Response:	50 Hz - 18 KHz
Sensitivity:	-47dB +/- 3dB @ 1 KHz(0dB = 1 V/Pa)
Impedance:	200 Ohms
S/N Radio:	64dB(A)
Maximum SPL:	125dB 1% THD
Power Requirements:	PPA-RF, SM20-RF, SM80-RF,SM80S-RF, S140-RF,CW9004
Termination:	3 pin female Mini XLRconnector.Pin 1 Phase -Pin 2 Phase +Pin 3 not used.
Accessories:	W2 Windshield included
Dimensions:
Head Diameter:	0.5" (12mm)
Shaft Diameter:	0.2" (6mm)
Overall Length:	C 312-SR 7.85" (200mm)C 313-SR 11.8" (300mm)C 314-SR 15.75" (400mm)
Net Weight:	.2oz (29gms)
Finish:	Satin Black