MP2800 - Video projector COMPAQ - Free user manual and instructions
Find the device manual for free MP2800 COMPAQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | Compaq |
| Model | MP2800 |
| Display Technology | DLP (Digital Light Processing) |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 2000 ANSI lumens |
| Contrast Ratio | 2000:1 |
| Aspect Ratio | 4:3 (compatible with 16:9) |
| Lamp Life | Up to 2000 hours (Eco mode up to 3000 hours) |
| Lamp Power | 200 W |
| Projection Distance | 1.2 - 10.0 m |
| Image Size | 0.76 - 7.62 m (30 - 300 inches) |
| Input Connectivity | VGA, S-Video, Composite, Audio |
| Output Connectivity | VGA monitor out, Audio out |
| Built-in Speaker | 2 W mono |
| Keystone Correction | Manual vertical (±15°) |
| Noise Level | 32 dB (Eco mode 29 dB) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 250 W (standby <5 W) |
| Dimensions (W x D x H) | 270 x 220 x 90 mm |
| Weight | 2.7 kg |
| Remote Control | Yes, included |
| Maintenance | Clean lens with soft dry cloth; replace lamp when indicator lights up |
| Safety | Overheat shutdown, auto power-off timer |
| General Information | Portable design, ceiling mount compatible |
Frequently Asked Questions - MP2800 COMPAQ
How do I connect my laptop to the Compaq MP2800 projector?
Connect the VGA cable from your laptop to the VGA input on the projector. Then use the Source button on the remote control or the projector panel to select VGA. For audio, connect the 3.5mm audio cable to the audio input.
What should I do if the projector does not display any image?
First, ensure the power cable is connected and the power LED lights up. Check that the source device is turned on and the correct input source is selected. Press the Source button to cycle through VGA, S-Video and Composite. If the lamp or temperature indicator flashes, refer to the troubleshooting section of the manual.
How do I replace the lamp on the Compaq MP2800?
Turn off the projector and unplug it. Let it cool for at least 30 minutes. Loosen the screw on the lamp cover located on the bottom of the unit. Slide out the old lamp carefully, then insert the new one, and tighten the screw. Reset the lamp timer using the On-Screen Display menu after replacement. Use only official replacement lamps to avoid damage.
How do I clean the projector lens?
Use a soft, lint-free cloth specifically for optics, such as a microfiber cloth. Gently wipe the lens in a circular motion. Do not use cleaning solutions, water, or compressed air, as they may damage the coating. If dust persists, use a lens brush first.
Why does the projector show a distorted image, and how do I fix it?
A distorted image is usually caused by keystone errors when the projector is not perpendicular to the screen. Use the keystone correction buttons on the projector or remote to adjust vertical distortion (±15°). Also, reposition the projector so that its lens is level with the center of the screen for a rectangular image.
Can I use the projector for home theater with HDMI devices?
The Compaq MP2800 does not have an HDMI port. It supports VGA, S-Video and composite video. To connect HDMI devices, you will need a converter or adapter that changes HDMI to VGA or S-Video. Keep in mind that the maximum resolution is XGA (1024x768), so 1080p sources will be downscaled.
How do I adjust the focus and zoom?
Rotate the focus ring on the lens until the image is sharp. For zoom, rotate the zoom ring (if available) to adjust the image size without moving the projector. Make small adjustments while observing the projected image for best clarity.
What is the recommended maintenance schedule?
Clean the air intake vents every month with a vacuum or soft brush to prevent overheating. Wipe the lens weekly in dusty environments. Replace the lamp after approximately 2000 hours of use, or when the lamp indicator turns red. Always use a Compaq-approved lamp.
Is it safe to leave the projector on for extended periods?
The projector has an overheat protection system that automatically shuts it down if the temperature exceeds safe levels. However, prolonged use can reduce lamp life. It is recommended to use Eco mode to lower brightness and heat, and to turn off the projector when not in use. The auto power-off timer can be set to trigger after a selected period of inactivity.
What accessories are included with the Compaq MP2800?
The standard package includes a power cord, a VGA signal cable, a wireless remote control with batteries, and a quick start guide. Some bundles may also include a carrying case and S-Video cable, but these vary by seller. Check the box contents list on the packaging.
User questions about MP2800 COMPAQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual MP2800 - COMPAQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP2800 by COMPAQ.
USER MANUAL MP2800 COMPAQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : COMPAQ
Model : MP2800
Category : Video projector