AV-TW5002B - Headphones Avenzo - Free user manual and instructions
Find the device manual for free AV-TW5002B Avenzo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Avenzo |
| Model | AV-TW5002B |
| Product Type | True Wireless Stereo (TWS) Earbuds |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 10 meters |
| Driver Size | 10 mm dynamic drivers |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 ohms |
| Sensitivity | 98 dB |
| Battery Life (Earbuds) | Up to 4 hours per charge |
| Charging Case Capacity | 300 mAh |
| Total Playtime | Up to 16 hours with charging case |
| Charging Time | 1.5 hours for earbuds, 2 hours for case |
| Charging Port | USB-C |
| Water Resistance | IPX5 (sweat and splash resistant) |
| Control Method | Touch controls with built-in microphone |
| Weight | 4 g per earbud, 48 g with case |
| Dimensions (Earbud) | 25 x 20 x 15 mm |
| Included Accessories | 2 earbuds, charging case, USB-C cable, silicone ear tips (S/M/L), user manual |
| Cleaning | Wipe with a soft, dry cloth; avoid liquids and abrasive cleaners |
| Safety | Do not expose to extreme temperatures or moisture; keep away from children |
| Repairability | No user-serviceable parts; contact Avenzo support for service |
Frequently Asked Questions - AV-TW5002B Avenzo
How do I pair my Avenzo AV-TW5002B with my phone?
Remove both earbuds from the charging case. They will enter pairing mode automatically (LED flashes). Go to Bluetooth settings on your device and select "AV-TW5002B". If pairing fails, reset the earbuds and try again.
How do I reset my earbuds if they are not working?
Place earbuds in the case and close the lid. Wait 10 seconds, then press the touch areas on both earbuds for 8 seconds until the LED flashes red. Reinsert and take them out to enter pairing mode.
How long does the battery last?
The earbuds offer up to 4 hours of playtime on a single charge. The included charging case provides an additional 12 hours, giving a total of up to 16 hours.
Are the earbuds waterproof?
The AV-TW5002B has an IPX5 rating, meaning it is sweat and splash resistant. Do not submerge in water or use in heavy rain.
Can I use just one earbud?
Yes, both earbuds can be used independently. Simply take one out of the case and pair it. Touch controls will work normally.
How do I control music and calls?
Use the touch controls: tap once to play/pause or answer/end call, tap twice to next track or decline call, tap three times for previous track. Long press to activate voice assistant.
What is the charging case battery capacity?
The charging case has a 300 mAh battery and charges via USB-C. It can recharge the earbuds about 3 times before needing to be charged itself.
Why is my earbud volume low or distorted?
Check the ear tip fit. A loose fit can affect bass response. Also, ensure the earbuds are clean. If distortion persists, reset the earbuds and re-pair.
How do I charge the earbuds?
Place the earbuds into the charging case and close the lid. The case will automatically start charging them. The LED on the case indicates charging status.
Are the earbuds compatible with all devices?
The Avenzo AV-TW5002B uses Bluetooth 5.0 and is compatible with most Bluetooth-enabled smartphones, tablets, and laptops, including both Android and iOS devices.
User questions about AV-TW5002B Avenzo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual AV-TW5002B - Avenzo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AV-TW5002B by Avenzo.