CFD-567 - Hi-Fi System SONY - Free user manual and instructions
Find the device manual for free CFD-567 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Portable Hi-Fi Stereo System (Boombox) |
| Brand | Sony |
| Model | CFD-567 |
| Audio system | Stereo with full-range speakers |
| CD player | Supports CD, CD-R, and CD-RW discs |
| Cassette deck | Stereo cassette player and recorder |
| Radio tuner | AM/FM with telescopic antenna |
| Power output | 2 x 2W RMS per channel |
| Power supply | AC 220-240V, 50Hz or 8 x D batteries (not included) |
| Dimensions (W x H x D) | Approx. 480 x 250 x 220 mm |
| Weight | Approx. 4.5 kg |
| Display | LCD with track/time and radio frequency |
| Headphone jack | 3.5mm stereo mini-jack for private listening |
| Sound controls | Bass boost and volume control |
| Connections | Built-in microphone for karaoke and tape recording |
| Maintenance | Clean with a soft, dry cloth; avoid solvents and water |
| Safety | Do not expose to rain or moisture; keep away from direct sunlight |
| Spare parts and reparability | Compatible spare parts available through Sony authorized service centers |
Frequently Asked Questions - CFD-567 SONY
How do I set the clock on my Sony CFD-567?
To set the clock, ensure the system is in standby. Press the CLOCK button and use the TUNING +/– buttons to adjust the hours and minutes. Press CLOCK again to confirm. Consult the manual for specific instructions.
How can I record from a CD to a cassette tape?
Insert a blank cassette into the tape deck. Press the CD button and load the CD. Then press REC on the cassette deck. To pause recording, press PAUSE. Ensure the tape is protected and has sufficient length.
What batteries does the CFD-567 require?
The Sony CFD-567 requires eight D-size batteries (R20 or LP20). They provide portable power for outdoor use. Insert them according to the polarity markings in the battery compartment.
Why is my CD player skipping tracks?
CD skipping can be caused by a dirty or scratched disc, or by vibration. Clean the disc with a soft cloth from the center outward. If the issue persists, try a different disc and place the unit on a stable surface.
How do I clean the tape heads?
Use a cotton swab lightly moistened with isopropyl alcohol to gently clean the tape heads and pinch rollers. Do not touch the heads with metal tools. Allow it to dry before playback.
Can I use the CFD-567 with headphones?
Yes, connect headphones with a 3.5mm stereo mini-jack to the PHONES outlet. When headphones are connected, the built-in speakers are muted automatically.
How do I switch between CD, cassette, and radio modes?
Use the FUNCTION button to cycle through CD, TAPE, and RADIO modes. The selected mode is shown on the display. Press the button until the desired source appears.
Why does the radio sound weak or distorted?
Extend the telescopic antenna fully for FM reception, and adjust its direction. For AM, rotate the unit to find the optimal position. Distortion can also occur near electronic interference.
Is it possible to connect an external audio device?
The CFD-567 does not have a dedicated auxiliary input, but you can use the built-in microphone to capture sound from an external source, or play via the FM transmitter if available. For best quality, use the CD player.
How do I reset the system if it freezes or malfunctions?
Disconnect the AC power cord and remove all batteries for at least 30 seconds, then reconnect. This resets the microprocessor. If the issue continues, contact Sony support.
User questions about CFD-567 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual CFD-567 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CFD-567 by SONY.