90CTS - Range hood ELECTROLUX - Free user manual and instructions
Find the device manual for free 90CTS ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Electrolux |
| Model | 90CTS |
| Product Type | Wall-Mounted Range Hood |
| Color | Stainless Steel |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 60 - 110 cm (adjustable chimney) |
| Net Weight | 15 kg |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 180 W |
| Extraction Capacity | 680 m³/h |
| Number of Speeds | 4 (including intensive) |
| Max Noise Level | 68 dB(A) |
| Lighting | 2 x 40 W Halogen |
| Controls | Electronic push buttons |
| Operation Mode | Ducted or recirculating |
| Grease Filter | Aluminium mesh, dishwasher safe |
| Duct Diameter | 150 mm |
Frequently Asked Questions - 90CTS ELECTROLUX
How do I clean the grease filter?
The aluminium grease filter should be cleaned every 2-3 months depending on use. Remove it by pressing the release clip, wash in warm soapy water or dishwasher, and dry thoroughly before reinstalling. Always ensure the filter is completely dry to prevent rust.
Can I use the hood in recirculation mode?
Yes, you can. If you cannot vent the air outside, install an activated charcoal filter to absorb odors. The charcoal filter should be replaced every 3-6 months for optimal performance.
How do I replace the halogen light bulbs?
Disconnect the hood from the power supply first. Locate the light housing, remove the bulb cover using a flat screwdriver, then replace the bulb with a new 40W halogen lamp. Reattach the cover and restore power after installation.
Why is my hood very loud?
Excessive noise can be due to a blocked duct, loose parts, or a dirty motor. Check the duct for kinks, ensure all screws are tight, and clean the grease filter. If noise persists, the motor bearing may be worn and needs professional servicing.
How do I adjust the speed settings?
Use the control panel buttons. Press the Speed + or Intensive button to increase the extraction speed. The intensive function runs for about 5 minutes then automatically returns to the previous speed. Press Speed - to reduce.
What size duct does the hood require?
The hood is designed for a 150 mm duct pipe. Make sure to use a smooth or flexible pipe with the same diameter to maintain optimal airflow and low noise levels.
How often should I replace the charcoal filter?
If you use the hood in recirculation mode, replace the activated charcoal filter every 3-6 months, or when you notice odors are no longer effectively absorbed. Over time, the filter becomes saturated and needs replacement.
How do I connect the hood to the electrical supply?
Electrical connection must be carried out by a qualified electrician. The hood has a 220-240V, 50Hz power supply. Ensure the installation has a grounded socket and an isolation switch with a contact gap of at least 3 mm. Verify that the main voltage matches the rating plate.
Can I install the hood myself?
Installation requires at least two people and basic DIY skills. You must fix the support bracket to the wall securely, mount the hood, then connect the duct and electrical supply. If you are unsure, contact a professional installer to avoid damage or injury.
Where can I find spare parts for my Electrolux 90CTS?
You can order genuine spare parts from the Electrolux website or authorized service centers. Search for the model 90CTS to find the grease filter, charcoal filter, light bulbs, and motor parts. Always quote the model and serial number.
User questions about 90CTS ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual 90CTS - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 90CTS by ELECTROLUX.