Samba 16955/10/30 - Switch Lucide - Free user manual and instructions
Find the device manual for free Samba 16955/10/30 Lucide in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Switch |
| Brand | Lucide |
| Model | Samba 16955/10/30 |
| Category | Switch |
| Material | Polycarbonate (PC) |
| Colour | White |
| Mounting Type | Flush-mounted |
| Dimensions (H x W x D) | 80 x 80 x 30 mm |
| Weight | 0.1 kg |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| Frequency | 50/60 Hz |
| IP Rating | IP20 |
| Insulation Class | Class I |
| Number of Poles | 1 (SPST) |
| Switch Function | Off/On |
| Safety Markings | CE |
| Operating Temperature | -10°C to +40°C |
| Cleaning | Wipe with a dry, soft cloth |
| Repairability | Standard interchangeable parts |
Frequently Asked Questions - Samba 16955/10/30 Lucide
Can I install this switch myself?
Yes, if you have basic electrical knowledge. However, we recommend hiring a qualified electrician to ensure safe installation and compliance with local regulations.
What is the maximum load for this switch?
The switch is rated for a maximum current of 10 A at 230 V AC, which equals a maximum load of 2300 W for resistive loads. Always check the connected device's power rating.
Is this switch compatible with LED bulbs?
Yes, it is suitable for LED lighting. For low-power LED bulbs, we advise using a non-dimmable switch unless the bulb is specified as dimmable.
What does the IP20 rating mean?
IP20 means the switch is protected against solid objects larger than 12.5 mm but not against water. It is therefore intended for indoor dry areas only.
Does the switch need a grounding connection?
Being Class I, it requires a protective earth connection. Ensure the wiring includes an earth wire and that it is correctly connected to the switch's earthing terminal.
How should I clean the switch?
Disconnect power first, then wipe the surface with a dry or slightly damp soft cloth. Do not use abrasive cleaners or solvents.
Can I use this switch outdoors?
No, because of its IP20 rating it is not waterproof and must be installed in a dry indoor location.
What type of wiring does the switch support?
It supports standard single-phase wiring with one live wire and one switched live wire. Use cables with a cross-section of 1.5 to 2.5 mm².
Does this switch work with smart home systems?
No, it is a manual switch and does not include Wi-Fi or smart protocols. It can only be used for manual on/off control.
What is the warranty period?
Lucide offers a two-year warranty against manufacturing defects. Keep your receipt as proof of purchase.
User questions about Samba 16955/10/30 Lucide
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual Samba 16955/10/30 - Lucide and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Samba 16955/10/30 by Lucide.
USER MANUAL Samba 16955/10/30 Lucide
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lucide
Model : Samba 16955/10/30
Category : Switch