ESSENCE IC6-W-T - Loudspeaker Crestron - Free user manual and instructions
Find the device manual for free ESSENCE IC6-W-T Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling loudspeaker |
| Brand | Crestron |
| Model | ESSENCE IC6-W-T |
| Woofer Size | 6.5-inch mineral-filled polypropylene cone |
| Tweeter Size | 0.75-inch titanium dome with pivoting mount |
| Frequency Response | 50 Hz - 20 kHz |
| Power Handling (Continuous) | 60 W |
| Power Handling (Program) | 120 W |
| Impedance | 8 ohms nominal |
| Transformer Taps | 70V/100V: 5W, 10W, 20W, 40W, and 8-ohm bypass |
| Sensitivity | 90 dB at 1W/1m |
| Mounting Type | Ceiling-mounted with dog-ear rotation clamps |
| Cutout Dimensions | 7.5-inch (191 mm) diameter |
| Overall Dimensions (Diameter x Depth) | 8.7 inches (221 mm) x 4.1 inches (104 mm) |
| Weight | 3.8 lb (1.7 kg) |
| Finish Color | White, paintable grille |
| Grille | Magnetic, trimless design |
| Maintenance | Wipe grille with a soft dry cloth; keep vents unobstructed |
| Safety | UL 1480 and CE certified for fire safety |
| Spare Parts & Repairability | Grille and transformer accessible for field replacement |
Frequently Asked Questions - ESSENCE IC6-W-T Crestron
What size ceiling cutout is required for the Crestron ESSENCE IC6-W-T?
The required cutout diameter is 7.5 inches (191 mm). Make sure to check for any joists or wires behind the ceiling before cutting.
How do I connect the speaker to a 70V amplifier system?
The IC6-W-T includes a transformer with selectable taps (5W, 10W, 20W, 40W). Set the tap switch to match your desired wattage and connect the speaker wire to the corresponding input terminals.
Can the speaker be used in a standard 8-ohm home audio system?
Yes, the speaker has an 8-ohm bypass position on the transformer tap switch. Select this position for direct connection to a conventional amplifier or receiver.
Is the tweeter adjustable for better sound direction?
Yes, the 0.75-inch titanium dome tweeter features a pivoting mount that allows you to aim it toward the listening area for improved high-frequency response.
What is the maximum power the speaker can handle?
The speaker handles 60 W continuous and 120 W program power. Exceeding these ratings may cause damage to the driver.
How do I paint the grille to match my ceiling?
The grille is paintable. Use spray paint or a brush, and be sure to remove the grille from the speaker before painting. Avoid clogging the holes with paint.
Can I install the speaker in a bathroom or outdoor covered area?
The IC6-W-T is UL 1480 certified for fire-protection signaling, but it is not rated for moisture or outdoor exposure. Use only in dry indoor locations.
What tools are needed for installation?
You will need a drywall saw or hole cutter, a screwdriver, and a wire stripper. The speaker includes dog-ear clamps that tighten with a screwdriver.
How do I maintain and clean the speaker?
Clean the grille occasionally with a soft dry cloth. Do not use water, solvents, or abrasive cleaners, as they can damage the surface.
Is there a warranty or after-sales support?
This Crestron product comes with a limited lifetime warranty. Contact Crestron customer service or your authorized dealer for any repair or replacement needs.
User questions about ESSENCE IC6-W-T Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ESSENCE IC6-W-T - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESSENCE IC6-W-T by Crestron.
USER MANUAL ESSENCE IC6-W-T Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : ESSENCE IC6-W-T
Category : Loudspeaker