DCX 200 - Telephone UNIDEN - Free user manual and instructions
Find the device manual for free DCX 200 UNIDEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Telephone Handset |
| Brand | Uniden |
| Model | DCX 200 |
| Technology | DECT 6.0 |
| Frequency Band | 1.9 GHz |
| Compatibility | Works with compatible Uniden base units |
| Display | Backlit LCD with Caller ID |
| Phonebook Capacity | Up to 100 contacts |
| Call Features | Caller ID, call waiting, mute, redial |
| Intercom Function | Yes, between handset and base |
| Speakerphone | Yes, hands-free speakerphone |
| Range | Up to 50 m indoors, 300 m outdoors |
| Battery Type | Rechargeable NiMH battery pack |
| Talk Time | Up to 10 hours |
| Standby Time | Up to 7 days |
| Charging Time | Approximately 12 hours |
| Power Supply | AC adapter for charging cradle (e.g., 9V DC) |
| Dimensions (Handset) | 4.3 x 1.8 x 1.1 inches (approx.) |
| Weight (Handset) | 4.2 oz (approx.) |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Do not expose to water; use only approved batteries and adapters |
| Spare Parts | Battery pack and AC adapter replaceable |
| Repairability | Modular design for easy replacement of battery and charger |
| General Information | Free user manual available for download in PDF |
Frequently Asked Questions - DCX 200 UNIDEN
How do I register the DCX200 handset to my base unit?
Place the handset on the base and press the Find or Intercom key for about 5 seconds until the display shows 'Registering'. Then follow the base unit instructions. If registration fails, reset the handset and try again.
What type of battery does the DCX200 use?
The DCX200 uses a rechargeable NiMH battery pack, typically rated at 2.4V and 650mAh. Use only Uniden-approved batteries to ensure safe operation.
Can I use the DCX200 with any Uniden base?
The DCX200 is designed for use with compatible Uniden base units that support DECT 6.0. Check your base station manual for compatibility. You may need to update your base unit's firmware.
How do I reset the DCX200 handset?
To reset the handset, press the Menu key, select 'Settings', then 'Reset' and confirm. This restores factory defaults but does not deregister the handset from the base.
How can I change the language on the DCX200?
Press Menu, then select 'Settings' or 'Setup'. Scroll to 'Language' and choose your preferred language from the list. Confirm with Select.
What is the maximum range of the DCX200?
The range is up to 50 meters indoors and 300 meters outdoors in open areas. Actual range may vary based on obstacles such as walls and interference.
How do I replace the battery in the DCX200?
Slide off the battery cover on the back of the handset, disconnect the old battery connector, and remove it. Insert the new battery, reconnect the connector, and replace the cover. Then charge for 12 hours.
How do I adjust the volume during a call?
While on a call, press the Volume Up or Volume Down keys on the side of the handset to adjust the earpiece volume. A volume bar will appear on the display.
How do I use the intercom function?
Press the Intercom key on the handset. Then use the number keys to select the base or another handset. Wait for the other party to answer. This works only within the same registered system.
Is the DCX200 hearing aid compatible?
Yes, the DCX200 has a hearing aid T-coil rating, allowing clear audio when used with hearing aids that have a telecoil switch. Enable the 'T-coil' mode in the audio settings for best performance.
User questions about DCX 200 UNIDEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Telephone in PDF format for free! Find your manual DCX 200 - UNIDEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCX 200 by UNIDEN.