7160-0981 - Computer Cooling Component Gamber-Johnson - Free user manual and instructions
Find the device manual for free 7160-0981 Gamber-Johnson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Computer Cooling Component |
| Brand | Gamber-Johnson |
| Model | 7160-0981 |
| Compatibility | Gamber-Johnson vehicle docking stations and mobile computer mounts |
| Cooling Type | Forced-air axial fan |
| Fan Diameter | 80 mm |
| Rated Voltage | 12 V DC |
| Power Consumption | 2.4 W |
| Airflow | 13.5 CFM |
| Noise Level | 28 dBA |
| Bearing Type | Dual ball bearing |
| Housing Material | Flame-retardant ABS plastic |
| Dimensions | 1.5 x 4.0 x 3.0 in (38 x 102 x 76 mm) |
| Weight | 0.55 lb (250 g) |
| Mounting | Screw holes and spring clips for docking station |
| Cable Length | 12 in (30 cm) with 2-pin connector |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Installation | Insert into cooling bay, secure with screws, and connect power lead |
| Maintenance | Clean fan blades and vents every 3 months with a dry cloth |
| Safety | Disconnect vehicle power before installation or cleaning |
| Repairability | Fan motor assembly is replaceable without soldering |
| Spare Parts | Replacement fan kits and mounting brackets available from manufacturer |
| Regulatory Compliance | CE and RoHS compliant |
Frequently Asked Questions - 7160-0981 Gamber-Johnson
What is the purpose of the Gamber-Johnson 7160-0981?
The 7160-0981 is a computer cooling component designed to dissipate heat from mobile computers and tablets mounted in vehicles. It uses forced air to keep the device within a safe operating temperature.
How do I install the 7160-0981 cooling component?
First, disconnect the vehicle battery or dock power. Then align the fan with the cooling bay of your Gamber-Johnson docking station, secure it using the provided screws or spring clips, and connect the 2-pin power lead to the dock connector.
What power supply does the fan need?
The fan operates on 12 V DC, which is supplied by the docking station or vehicle electrical system. Do not connect it directly to higher voltage as it may damage the unit.
Is the 7160-0981 compatible with all Gamber-Johnson mounts?
It fits most Gamber-Johnson vehicle docks that feature a 76 x 102 mm cooling bay. Check your mount's dimensions and connector type before ordering.
How should I clean the cooling fan?
Disconnect power first. Use a dry lint-free cloth or low-pressure compressed air to remove dust from the fan blades, grille, and vents. Avoid water and aerosol cleaners.
What is the airflow rating?
The unit delivers 13.5 CFM (cubic feet per minute) of airflow, sufficient to cool low-power industrial and mobile computers under normal operating loads.
Can I replace the fan myself?
Yes, the fan motor assembly is replaceable without soldering. After disconnecting power, unscrew the fan from its housing, disconnect the lead, fit the replacement, and reassemble.
Why is my fan making excessive noise?
Excessive noise is usually caused by dust accumulation or a worn bearing. Clean the fan, check for cable obstructions, and if the noise continues, replace the fan assembly.
What happens if the fan fails?
If the fan stops, the protected device may overheat. Check the power connector and clean the fan. If it still does not spin, install a replacement fan kit from Gamber-Johnson.
What is the operating temperature range?
The cooling component is rated for operation from -10°C to 60°C, making it suitable for vehicles in both cold and hot environments.
User questions about 7160-0981 Gamber-Johnson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer Cooling Component in PDF format for free! Find your manual 7160-0981 - Gamber-Johnson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7160-0981 by Gamber-Johnson.