SFT-2 - Wall mount Chief - Free user manual and instructions
Find the device manual for free SFT-2 Chief in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Mount |
| Brand | Chief |
| Model | SFT-2 |
| Category | Flat Panel Display Wall Mount |
| Compatible Display Sizes | 26" - 55" |
| VESA Mounting Patterns | 100x100, 200x200, 300x300, 400x400 mm |
| Maximum Weight Capacity | 50 kg (110 lbs) |
| Tilt Adjustment | -5° to +5° |
| Swivel Adjustment | Fixed |
| Level Adjustment | ±1° |
| Mounting Configuration | Single stud or dual stud compatible |
| Wall Plate Compatibility | Wood stud, solid concrete |
| Material | Steel |
| Finish | Powder-coated black |
| Dimensions (W x H x D) | 455 x 170 x 50 mm |
| Net Weight | 2.3 kg |
| Installation | Includes mounting hardware |
| Cable Management | Integrated cable conduit |
| Maintenance and Cleaning | Wipe with dry soft cloth |
| Safety Compliance | UL Listed |
| Warranty | 10 years |
Frequently Asked Questions - SFT-2 Chief
What is the maximum VESA pattern supported by the Chief SFT-2?
The Chief SFT-2 supports VESA patterns up to 400x400 mm, accommodating most flat panels from 26 to 55 inches.
How much weight can this wall mount hold?
This mount has a maximum weight capacity of 50 kg (110 lbs), ensuring secure support for medium to large flat panel displays.
Can the SFT-2 be installed directly on drywall without studs?
No. The mount must be anchored to wood studs or a solid concrete wall. Use the included lag bolts and washers for safe installation.
How do I ensure the mount is level before tightening?
Use a bubble level on the wall plate, and utilize the ±1° level adjustment on the display brackets to fine-tune alignment after installing the panel.
What tools are required for installation?
You will need a Phillips screwdriver, a socket wrench, and a stud finder. All other hardware is included in the box.
Is the Chief SFT-2 compatible with curved TVs?
Yes, the SFT-2 works with most curved monitors and TVs. The VESA mounting holes on curved displays are typically flat, so the mount will hold them securely.
Does the mount allow tilting after installation?
Yes, the SFT-2 offers -5° to +5° tilt adjustment, which you can set by loosening the tilt screws, positioning the display, and retightening.
Can I mount this on a concrete wall?
Absolutely. For concrete, use the included concrete anchors. Drill pilot holes with a masonry bit, insert anchors, and secure the wall plate.
How should I clean the mount?
Use a dry soft cloth to wipe the surface. Avoid water, solvents, or abrasive cleaners to protect the powder-coated finish.
Does the SFT-2 come with a warranty?
Yes, Chief provides a 10-year warranty, covering defects in materials and workmanship under normal use.
User questions about SFT-2 Chief
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wall mount in PDF format for free! Find your manual SFT-2 - Chief and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFT-2 by Chief.
USER MANUAL SFT-2 Chief
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chief
Model : SFT-2
Category : Wall mount