Profilo

BM4282EG - Dishwasher Profilo - Free user manual and instructions

Find the device manual for free BM4282EG Profilo in PDF.

📄 42 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Profilo BM4282EG - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Built-in dishwasher
Brand Profilo
Model BM4282EG
Place settings 12 standard place settings
Dimensions (H × W × D) 85 × 60 × 60 cm
Cut-out dimensions (H × W × D) 82 × 60 × 57 cm
Weight Approximately 50 kg
Rated voltage 220–240 V, 50 Hz
Water connection Cold water, 3/4″ thread
Water pressure 0.05–1.0 MPa
Wash programs Eco, Intensive, Normal, Quick, Glass, Delicate
Program options Half load, ExtraDry, Delay start (1–24 h)
Display LED digital display with error codes
Indicators Salt, rinse aid, and program progress LEDs
Racking system Adjustable upper basket, foldable lower tines
Cutlery basket Removable, located on lower rack
Noise level Approximately 48 dB(A) re 1 pW
Energy efficiency class A++ (on the 2010 EU scale)
Water consumption About 9.5 L per eco program
Annual energy consumption Around 256 kWh per 280 standard cycles
Safety systems Water protection system, child lock
Cleaning and maintenance Self-cleaning filter, removable spray arms
Spare parts Filters, spray arms, racks, heating element available
Repairability Designed for repair: easy access to components

Frequently Asked Questions - BM4282EG Profilo

How do I install the Profilo BM4282EG dishwasher?
Ensure the cut-out dimensions match 82×60×57 cm. Connect the water supply to a 3/4″ cold water valve, attach the drain hose to the siphon, and plug the power cable into a grounded outlet. Level the appliance by adjusting the feet.
Which detergent and rinse aid should I use?
Use a dishwasher detergent (tablets, powder, or gel) specifically for automatic dishwashers. Add rinse aid to the dedicated reservoir to improve drying. Check the salt container for water softener refill if required.
Why is my dishwasher not draining?
Check for a blocked drain hose or a clogged filter. The drainage pump might be stuck. Remove the lower rack, take out the filter assembly, and clean it under running water. If the problem persists, inspect the drain pump for debris.
How do I clean the filters?
Turn off the dishwasher and remove the lower basket. Rotate the cylindrical filter counterclockwise and lift it out along with the flat filter. Rinse them well under warm water and use a brush if sticky residue remains. Reassemble after cleaning.
What does error code E15 mean?
E15 indicates a water leak detection. Turn off the appliance at the tap and unplug it. Tilt the dishwasher slightly to empty the base pan water. After drying the base, reset the machine by plugging it back in and selecting a program.
How can I adjust the upper rack?
The upper rack height can be adjusted using the height adjustment mechanism on the side rails. Slide the rack out fully, lift the front or rear handles (depending on model), and raise or lower the rack to the desired position. This provides more space for tall glasses or large plates.
Is it safe to put plastic items in the dishwasher?
Only place dishwasher-safe plastics on the upper rack to avoid contact with the heating element. Check the item's label for the dishwasher symbol. Do not wash single-use plastics, as they can deform or release harmful substances.
What should I do if the cutlery is not dry?
Ensure the rinse aid is filled and the ExtraDry option is enabled for maximum drying. Load cutlery with the hollow parts facing down and remove the basket promptly after the cycle ends. Also, check that the heat exchanger is not covered by large dishes.
How do I activate the child lock?
To enable the child lock, press and hold the Start/Reset button for about 3 seconds until the key symbol appears on the display. This locks all buttons except the main power. Repeat the same operation to deactivate it.
Where can I find spare parts?
Spare parts such as filters, spray arms, racks, and heating elements can be ordered from authorized Profilo service centers or online spare parts retailers. Always quote the model number BM4282EG to get the correct components.

User questions about BM4282EG Profilo

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual BM4282EG - Profilo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BM4282EG by Profilo.

USER MANUAL BM4282EG Profilo

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Profilo

Model : BM4282EG

Category : Dishwasher