Smart-AVI

SignWare-Pro - AV extender Smart-AVI - Free user manual and instructions

Find the device manual for free SignWare-Pro Smart-AVI in PDF.

📄 43 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Smart-AVI SignWare-Pro - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type AV Extender (HDMI Over IP)
Brand Smart-AVI
Model SignWare-Pro
Video Formats Supported Up to 4K@60Hz (4:4:4), 1080p, 3D
Transmission Distance Up to 150 m over Cat6/6a cable
Connectors HDMI in/out, RJ45, 3.5mm IR, RS-232, DC power
Dimensions (TX/RX) 115 mm × 70 mm × 25 mm each
Weight (TX/RX) 220 g each
Power Supply 12V DC / 2A adapter, POC (Power over Cable) support
HDCP Compliance HDCP 2.2
EDID Management Built-in EDID emulation and manual EDID learning
IR Control IR input/output for remote extension at both ends
RS-232 Control Bidirectional RS-232 pass-through for serial devices
Audio Support Embedded HDMI audio up to 7.1 channels
Mounting Options Small form factor, can be wall-mounted with included brackets
Operating Temperature 0°C to 45°C (32°F to 113°F)
Maintenance and Cleaning Wipe with a soft dry cloth, avoid liquids and solvents
Safety Precautions Indoor use only, ensure proper ventilation, do not expose to moisture
Spare Parts and Repairability No user-serviceable parts inside; contact Smart-AVI for service
Package Contents Transmitter, receiver, 2× power adapters, IR blaster, IR receiver, mounting kit

Frequently Asked Questions - SignWare-Pro Smart-AVI

How do I connect the SignWare-Pro AV extender?
Connect the HDMI source (e.g., laptop) to the transmitter's HDMI input, then run a Cat6 cable from the transmitter's RJ45 port to the receiver's RJ45 port, and finally connect the receiver's HDMI output to your display. Make sure both units are powered on.
What is the maximum transmission distance?
Over Cat6/6a cable, the SignWare-Pro supports distances up to 150 meters (approximately 490 feet) for 1080p and about 100 meters for 4K signals.
Does it support 4K video?
Yes, the extender supports 4K resolution up to 60 Hz with 4:4:4 chroma subsampling, as well as 1080p, 3D, and other standard video formats.
Can I use Power over Cable (POC)?
Yes, the SignWare-Pro supports Power over Cable (POC), which allows one power adapter to feed the receiver from the transmitter side, or vice versa, simplifying installation.
How do I extend infrared (IR) signals?
Connect the included IR blaster to the IR output of the unit where your remote control points, and connect the IR receiver to the IR input of the other unit. This allows you to control the source or display from either location.
Is RS-232 control supported?
Yes, the unit provides bidirectional RS-232 pass-through, enabling you to send serial commands from a control system to devices such as projectors or displays over the same cable.
What is HDCP and does it matter?
HDCP (High-bandwidth Digital Content Protection) prevents piracy. The SignWare-Pro is HDCP 2.2 compliant, so it can handle protected content from streaming services, Blu-ray players, and other sources.
How do I troubleshoot no video output?
First, verify that both the transmitter and receiver have power LEDs lit. Check that the HDMI cables are firmly connected and the Cat6 cable is securely plugged in. Also confirm the display input is set correctly. If using 4K, ensure the cable length does not exceed 100 meters.
Can I use this extender with different HDMI versions?
Yes, it is backwards compatible with HDMI 2.0, 1.4, and earlier versions, so it works with a wide range of source and display devices.
How do I clean and maintain the device?
Use a soft, dry, lint-free cloth to wipe the exterior. Do not use water, harsh chemicals, or abrasive cleaners. Keep the vents dust-free to ensure proper airflow and avoid overheating.

User questions about SignWare-Pro Smart-AVI

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your AV extender in PDF format for free! Find your manual SignWare-Pro - Smart-AVI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SignWare-Pro by Smart-AVI.

USER MANUAL SignWare-Pro Smart-AVI

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Smart-AVI

Model : SignWare-Pro

Category : AV extender