WTE86110EE - Tumble dryer BOSCH - Free user manual and instructions
Find the device manual for free WTE86110EE BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Tumble Dryer |
| Brand | Bosch |
| Model | WTE86110EE |
| Drying Capacity | 8 kg |
| Energy Efficiency Class | B |
| Drying System | Condenser with heat exchanger |
| Dimensions (H x W x D) | 84.2 x 59.8 x 59.9 cm |
| Net Weight | 37 kg |
| Drum Volume | 112 L |
| Number of Drying Programs | 15 including cotton, synthetics, delicates, wool, and timed drying |
| Noise Level | 67 dB(A) |
| Control Type | Rotary dial and buttons |
| Display Type | LED display showing remaining time and selected program |
| Drum Material | Stainless steel |
| Door Type | Hinged door with large opening |
| Reversible Door | Yes |
| Water Tank Location | Top right corner, easy to empty |
| Lint Filter | Removable, located in door frame for easy cleaning |
| Anti-Crease Function | Yes, with 60-minute interval |
| Delay Start | Up to 24 hours |
| Rated Power Consumption | 5.65 kWh per full load |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Installation Type | Freestanding |
| Color | White |
Frequently Asked Questions - WTE86110EE BOSCH
How often should I clean the lint filter?
Clean the lint filter after every drying cycle to maintain maximum airflow and efficiency. A clogged filter can lengthen drying times and increase energy consumption. Simply open the door, lift the filter out, and remove the fluff with your hand or a soft brush.
How do I clean the heat exchanger / condenser?
The heat exchanger should be cleaned when the heat exchanger indicator lights up. Turn off the dryer, wait for it to cool, then open the lower flap on the front. Pull out the heat exchanger unit, rinse it under running water to remove any fluff, and dry it before reinserting. Do not use any sharp tools.
What should I do if the dryer does not start?
First, ensure the door is fully closed and the appliance is plugged in and switched on. Check that the water container is not full (if applicable) and the lime filter is clean. Also verify that the selected program hasn't been delayed (Delay Start). If the issue persists, consult the user manual's troubleshooting section.
When should I empty the water container?
Empty the water container after each drying cycle to prevent overflow and ensure proper operation. The container is located at the top right corner. Pull it straight out, pour the water away, and push it back until it clicks into place.
Can I dry delicate fabrics in this dryer?
Yes, this dryer has a dedicated delicates program that uses a lower temperature and gentler mechanical action. Always check the care label on your garments. Wool items should be dried with the wool program to minimize shrinkage and maintain shape.
How can I prevent creasing after the cycle ends?
Use the anticrease function to tumble the load periodically for up to 60 minutes after drying has finished. Additionally, remove items as soon as the cycle completes and fold or hang them immediately. Avoid overloading the drum.
What does the 'Fluff in heat exchanger' indicator mean?
This warning appears when fluff has accumulated in the heat exchanger, reducing drying efficiency. It reminds you to clean the condenser. Open the lower flap, pull out the heat exchanger, rinse it thoroughly with water, and dry it before reinstalling. Press the reset button if available.
How do I install the dryer for optimal performance?
Place the dryer on a level, stable surface with at least 10 cm clearance around it for ventilation. Do not install it in a room with extremely high humidity. For stackable setups, use the appropriate stacking kit. Ensure the plug is accessible after installation.
What are some energy-saving tips for this dryer?
Spin laundry at a high speed (e.g., 1200-1400 rpm) in the washing machine to reduce residual moisture. Clean the lint filter and heat exchanger regularly. Use the auto programs instead of timed drying to stop when the load is dry, and avoid overloading.
Why is the drying cycle taking longer than expected?
Longer cycles can be caused by a clogged lint filter or heat exchanger, overloading, or selecting a program with a low temperature. Also, check if the ambient room temperature is too low (above 5°C is recommended) and ensure the dryer is not installed near a heat source.
User questions about WTE86110EE BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual WTE86110EE - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WTE86110EE by BOSCH.
USER MANUAL WTE86110EE BOSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSCH
Model : WTE86110EE
Category : Tumble dryer