VSL454BF - Range hood Trade-Wind - Free user manual and instructions
Find the device manual for free VSL454BF Trade-Wind in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Under-cabinet range hood |
| Brand | Trade-Wind |
| Model | VSL454BF |
| Width | 45 inches (114.3 cm) |
| Height | 10 inches (25.4 cm) |
| Depth | 24 inches (61 cm) |
| Weight | 90 lbs (40.8 kg) |
| Mounting Type | Under-cabinet |
| Blower Type | Internal blower |
| Airflow Capacity | 900 CFM (cubic feet per minute) |
| Noise Level | 6.5 sones (maximum speed) |
| Number of Speeds | 3 |
| Lighting | 2 x 50W halogen bulbs (GU10 base) |
| Filter Type | Stainless steel baffle filters |
| Number of Filters | 2 |
| Duct Size | 6-inch round duct |
| Venting Options | Top or back venting |
| Control Type | Electronic push-button controls |
| Finish | Brushed stainless steel |
| Power Supply | 120V AC, 60Hz |
| Energy Consumption | 400W total |
| Certifications | UL Listed |
| Warranty | 3-year limited |
Frequently Asked Questions - VSL454BF Trade-Wind
What is the recommended installation clearance for the VSL454BF range hood?
The ideal clearance is 30 inches from the cooking surface to the bottom of the hood. For gas stoves, increase to 36 inches to ensure safe operation.
How often should I clean the stainless steel baffle filters?
Clean the filters every 3 months or after 30 hours of use. Remove them, soak in warm water with degreaser, rinse, and dry thoroughly before reinstalling.
Can I use the VSL454BF in ductless mode?
Yes, but you must install charcoal filters (not included) to recirculate the air. The hood can be configured for either vented or recirculating operation. Ensure the charcoal filters are replaced every 6 months.
How do I replace the halogen light bulbs?
First, disconnect power. Gently twist the bulb retainer and pull out the old bulb. Insert a new 50W halogen bulb (GU10 base) and reassemble. Always allow the bulb to cool before handling.
How can I reduce the noise level of my range hood?
Operating at lower speeds will reduce noise. Add rubber isolation pads to the mounting screws and ensure the ductwork is smooth to minimize vibration and turbulence. Regular cleaning also prevents rattles.
What maintenance does the motor require?
The motor is permanently lubricated and requires no periodic maintenance. However, keep it clean and free of grease by regularly wiping the interior with a damp cloth and mild detergent.
Is the VSL454BF protected against heat or fire?
The hood is UL Listed and includes thermal overload protection. Follow local fire codes and keep the filters clean to prevent grease buildup. The blower will automatically shut off if overheating is detected.
Why is the light not turning on?
Check the bulb first, then the light switch. If both are fine, the transformer may be faulty; contact Customer Support for replacement. Always disconnect the power supply before inspecting.
Where can I purchase spare parts for the VSL454BF?
Contact Trade-Wind directly or find authorized dealers. Common spares like filters, bulbs, and the control panel are readily available. Check the product manual for part numbers and ordering procedures.
Does this hood require professional installation?
While it is possible for experienced DIYers, professional installation is recommended because it involves electrical wiring and ductwork for optimal performance. Incorrect installation may void the warranty.
User questions about VSL454BF Trade-Wind
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual VSL454BF - Trade-Wind and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VSL454BF by Trade-Wind.