FXFA20A2VEB - Air conditioner DAIKIN - Free user manual and instructions
Find the device manual for free FXFA20A2VEB DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Air conditioner (indoor unit) |
| Marque | Daikin |
| Modèle | FXFA20A2VEB |
| Type d'unité | Floor-standing indoor unit |
| Puissance de refroidissement | 2.0 kW (6,800 BTU/h) |
| Puissance de chauffage | 2.3 kW (7,800 BTU/h) |
| Alimentation | 220-240 V, 50/60 Hz |
| Dimensions (L × H × P) | 600 × 1,850 × 300 mm |
| Poids net | 36 kg |
| Niveau sonore | 23–37 dB(A) |
| Réfrigérant | R-410A (pre-charged in outdoor unit) |
| Débit d'air (high/low) | 7.5 / 6.0 m³/min |
| Fonctions principales | Cooling, heating, fan and dehumidification modes |
| Filtre à air | Washable anti-bacterial filter |
| Contrôle | Wired remote control (excluded) / optional infrared |
| Entretien | Clean the filter every 2 weeks; check drain pan |
| Sécurité | Earth leakage circuit breaker required; auto restart function |
| Pièces détachées | Filters, remote controls, sensors and PCB available from Daikin spare parts network |
| Réparabilité | Modular design with replaceable main components |
| Garantie | 2 years parts and labor (standard) |
Frequently Asked Questions - FXFA20A2VEB DAIKIN
What is the cooling capacity of the Daikin FXFA20A2VEB?
The cooling capacity is 2.0 kW (6,800 BTU/h). For heating mode, it provides 2.3 kW (7,800 BTU/h), making it suitable for a room of approximately 15-25 m².
How to clean the air filter of the FXFA20A2VEB?
Switch off the unit and open the front panel. Remove the air filter and wash it with a vacuum cleaner or under running water. Let it dry completely before reinstalling. Clean the filter every 2 weeks.
Does the FXFA20A2VEB require a dedicated power line?
It is recommended to use a dedicated earth leakage circuit breaker to ensure safety. The power supply is 220-240 V, 50/60 Hz, and must be installed by a qualified technician.
What type of refrigerant does the Daikin FXFA20A2VEB use?
The unit uses R-410A refrigerant. It is pre-charged in the outdoor unit, so no refrigerant handling is required during normal installation.
What are the dimensions and weight of the floor-standing unit?
The dimensions are 600 × 1,850 × 300 mm (width × height × depth) and the net weight is 36 kg. These values are typical for a floor-standing indoor unit.
Can the FXFA20A2VEB be used for both heating and cooling?
Yes, this unit is a heat pump model. It provides both cooling and heating functions, along with fan and dehumidification modes.
How to reset the unit after a power failure?
The unit has an auto restart function. After a power failure, it automatically resumes operation with the previous settings. If it does not restart, turn off the main switch, wait 30 seconds, and turn it back on.
What is the recommended room size for this air conditioner?
Based on the cooling capacity of 2.0 kW, the recommended room size is approximately 15-25 m². For larger rooms, consider a unit with higher capacity.
How to save energy with the Daikin FXFA20A2VEB?
Use the saving mode function, set the thermostat to a moderate temperature, and keep the filters clean. Regular professional maintenance also ensures high efficiency.
Where can I find spare parts for this model?
Spare parts such as filters, remote controls, sensors, and PCBs are available through the Daikin spare parts network. Contact your local Daikin distributor or authorized service center.
User questions about FXFA20A2VEB DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual FXFA20A2VEB - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FXFA20A2VEB by DAIKIN.