R183-SF0 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free R183-SF0 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 1U |
| Dimensions (W x H x D) | 438 x 43.5 x 650 mm |
| Weight | 12 kg (approx.) |
| Power Supply | Redundant 800W 80+ Platinum |
| Processor | Dual Socket LGA 3647 (Intel Xeon Scalable) |
| Memory | 16 DIMM slots, DDR4 |
| Storage Bays | 8 x 2.5\" Hot-Swap SATA/SAS |
| Network Interface | 2 x Gigabit Ethernet, 1 x Mgmt |
| Management | Integrated BMC (AST2500) |
| Expansion Slots | 2 x PCIe Gen3 |
| Cooling | 4 x Hot-Swap PWM Fans |
| Operating Temperature | 10\u00b0C to 35\u00b0C |
| Safety Compliance | CE, FCC |
| Maintenance | Hot-Swap components for easy service |
| Cleaning | Use dry compressed air to remove dust |
| Spare Parts | Available at authorized Gigabyte retailers |
| Repairability | Modular design for quick component replacement |
| Warranty | 3-year limited hardware warranty |
Frequently Asked Questions - R183-SF0 GIGABYTE
What type of server is the Gigabyte R183-SF0?
The R183-SF0 is a 1U rack server designed for data center and enterprise workloads. It supports dual Intel Xeon Scalable processors and offers high-density storage and networking.
Which processors are compatible with the R183-SF0?
The server supports Intel Xeon Scalable processors (2nd and 3rd Gen) installed in two LGA 3647 sockets. Ensure the BIOS is updated to support the specific CPU generation.
How many memory slots are available?
The R183-SF0 has 16 DIMM slots supporting DDR4 ECC memory with speeds up to 3200 MHz. Maximum capacity depends on the CPUs and registered DIMM sizes.
Can I configure RAID on this server?
Yes, the server includes an onboard SATA controller supporting RAID 0, 1, 10 via the Intel VMD (Virtual RAID on CPU). For advanced levels, install a dedicated RAID controller in the PCIe slot.
How to access the remote management interface?
The server includes a dedicated BMC port. Connect to it and use the default IP (192.168.0.1) or set it via BIOS. Open a browser to the IP to access the web-based management interface for iKVM and sensor monitoring.
How to update the firmware?
Download the latest firmware packages from Gigabyte’s official website and use the BMC web interface's Update → Firmware Upload section. Alternatively, use the uEFI shell flashing utilities provided in the support package.
What is the default BMC IP address?
The default BMC IP is 192.168.0.1 with a subnet mask of 255.255.255.0. The default username and password are printed on a label on the server chassis or in the quick start guide.
How to replace a failed power supply unit?
The R183-SF0 features redundant hot-swap PSUs. To replace a failed unit, remove the AC cable, press the release latch, and slide the PSU out. Slide the new unit in until it clicks, then reconnect AC power.
How to clean the server to prevent overheating?
For regular maintenance, use dry compressed air to blow out dust from the fans, heat sinks, and intake vents. Power off the server and disconnect power before cleaning. For deeper cleaning, minimally use a soft brush.
What operating systems are compatible?
The server supports a wide range of enterprise OS including Windows Server 2016/2019/2022, Red Hat Enterprise Linux, Ubuntu Server, CentOS, and VMWare ESXi. Check the Gigabyte support page for specific versions and drivers.
User questions about R183-SF0 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual R183-SF0 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. R183-SF0 by GIGABYTE.
USER MANUAL R183-SF0 GIGABYTE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIGABYTE
Model : R183-SF0
Category : Server