UT60EBT - Multimeter Uni-T - Free user manual and instructions
Find the device manual for free UT60EBT Uni-T in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Uni-T |
| Model | UT60EBT |
| Display | 4000 counts LCD with backlight |
| DC Voltage Range | 400mV to 1000V |
| AC Voltage Range | 400mV to 750V |
| DC Current Range | 400μA to 10A |
| AC Current Range | 400μA to 10A |
| Resistance Range | 400Ω to 40MΩ |
| Capacitance Range | 4nF to 100μF |
| Frequency Range | 10Hz to 10MHz |
| True RMS | Yes |
| Bluetooth Connectivity | Yes, for wireless data logging |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Auto Range | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Battery Type | 9V 6F22 battery |
| Dimensions | 180 x 87 x 47 mm |
| Weight | Approximately 350g |
| Safety Rating | CAT II 1000V, CAT III 600V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Frequently Asked Questions - UT60EBT Uni-T
How do I measure DC voltage with the UT60EBT?
Turn the dial to the V DC setting. Connect the red probe to the VΩmA jack and the black probe to the COM jack. Touch the probes to the test points and read the value on the display.
How do I measure resistance?
Set the dial to the Ω (ohms) position. Connect the red probe to the VΩmA jack and the black probe to COM. Place the probes across the resistor and read the resistance. Ensure the circuit is powered off before measuring.
What does 'OL' on the display mean?
OL stands for Overload. It indicates that the measured value is outside the selected range or the input is beyond the meter's maximum limit. Switch to a higher range if possible.
How do I use the Bluetooth functionality?
Download the compatible Uni-T app on your smartphone. Enable Bluetooth and press the Bluetooth button on the meter. Pair the device in the app to start wireless data logging and real-time measurements.
How do I replace the battery?
Turn off the meter and remove the test leads. Unscrew the battery cover on the back and lift it off. Replace the old 9V 6F22 battery with a new one, ensuring correct polarity. Secure the cover back in place.
What safety precautions should I take?
Always start with the highest range if unsure. Do not measure voltages above the rated limit. Use insulated probes and keep fingers behind the guard. Disconnect power before measuring resistance or capacitance.
How do I test continuity?
Turn the dial to the continuity (buzzer) symbol. Connect probes as usual. If the resistance is below approximately 30Ω, the buzzer will sound, indicating a continuous circuit.
Can I measure AC current with this multimeter?
Yes, the UT60EBT can measure AC current up to 10A. Set the dial to the ACA range, connect the probes in series with the circuit, and read the current. Do not exceed 10A for more than 10 seconds.
How do I use the data hold feature?
Press the HOLD button to freeze the current reading on the display. Press it again to release the hold. This is useful for capturing values in hard-to-reach areas.
Does the meter have a backlight?
Yes, the UT60EBT features a LCD backlight for improved visibility in low-light conditions. Press and hold the backlight button to turn it on or off.
User questions about UT60EBT Uni-T
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual UT60EBT - Uni-T and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UT60EBT by Uni-T.
USER MANUAL UT60EBT Uni-T
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Uni-T
Model : UT60EBT
Category : Multimeter