Tottem 2 - Synthesizer AtomoSynth - Free user manual and instructions
Find the device manual for free Tottem 2 AtomoSynth in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Synthesizer |
| Brand | AtomoSynth |
| Model | Tottem 2 |
| Dimensions (L x W x H) | 30 cm x 20 cm x 5 cm |
| Weight | 1.8 kg |
| Power supply | 12V DC adapter (included) or USB-C PD |
| Keyboard | 37 velocity-sensitive mini keys |
| Sound engine | Virtual analog with 3 oscillators and FM |
| Polyphony | 8 voices |
| Effects | Chorus, delay, reverb |
| Connectivity | MIDI in/out, CV/Gate, headphone, line out |
| Memory | 128 presets (64 factory, 64 user) |
| Sequencer | 32-step sequencer with arpeggiator |
| Display | 128x64 OLED screen |
| Maintenance and cleaning | Use a soft, dry cloth; avoid liquids |
| Safety | Keep away from moisture and heat |
| Spare parts and repairability | Replaceable knobs and keys; contact certified support |
| General information | Free user manual on notice-facile.com |
Frequently Asked Questions - Tottem 2 AtomoSynth
How do I power on the AtomoSynth Tottem 2?
Connect the included 12V DC adapter to the rear panel and press the power button next to the display. The OLED screen lights up, and you can select a preset using the patch browser.
What power adapter is required for the Tottem 2?
The Tottem 2 requires a 12V DC adapter with center-positive polarity and at least 500mA. You can also use USB-C with a compliant cable, but the DC adapter is recommended for stable operation.
How do I connect the Tottem 2 to my computer?
Use a USB cable to connect the USB-C port on the synth to your computer. The device appears as a class-compliant MIDI interface. For audio over USB, you may need to install drivers from the AtomoSynth website.
Why is there no sound coming from the Tottem 2?
Check that the volume knob is turned up and that the headphone or line output is properly connected. Make sure the local control is enabled in the settings and that the output mode is not set to USB only.
How can I save my own patches on the Tottem 2?
After adjusting the sound, press SHIFT and SAVE. Use the data encoder to select a user preset slot (01-64) and confirm with ENTER. Your patch is stored in the user memory for instant recall.
Can I use the Tottem 2 as a MIDI controller for other gear?
Yes, the Tottem 2 sends MIDI over USB, 5-pin DIN, and CV/Gate outputs. Set the MIDI channel in the global settings to control external synthesizers or DAW plugins.
How do I update the firmware on the Tottem 2?
Download the latest firmware file from the AtomoSynth website. Connect the synth via USB, then hold SHIFT while plugging in the cable to enter bootloader mode. Transfer the file using a simple tool or drag-and-drop.
How should I clean and maintain the Tottem 2?
Use a soft, dry cloth to wipe the surface and keys. Do not use alcohol or solvents as they can damage the finish. Keep the device in a dust-free environment and cover it when not in use.
Can I use headphones with the Tottem 2?
Connect any stereo headphone with a 1/4-inch jack to the headphone output on the front panel. The volume knob controls headphone level. No additional amplifier is needed.
How do I reset the Tottem 2 to factory settings?
Press SHIFT and UTILITY, navigate to RESET, and select FACTORY. Confirm with ENTER. This restores all presets and global settings to original values.
User questions about Tottem 2 AtomoSynth
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Tottem 2 - AtomoSynth and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tottem 2 by AtomoSynth.
USER MANUAL Tottem 2 AtomoSynth
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AtomoSynth
Model : Tottem 2
Category : Synthesizer