CE620-AT-G - Switch ATEN - Free user manual and instructions
Find the device manual for free CE620-AT-G ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ATEN |
| Model | CE620-AT-G |
| Product Type | 2-Port HDMI HDBaseT Extender Switch |
| Video Input Ports | 2 x HDMI (local unit) |
| Video Output Ports | 1 x HDMI (remote unit), 1 x HDMI (local loop-out) |
| Signal Interface | HDBaseT 2.0 |
| Maximum Resolution | 4K UHD (3840 x 2160) @ 60 Hz |
| Transmission Distance | Up to 100 m over Cat6a, 60 m over Cat5e |
| IR Support | IR pass-through for remote source control |
| RS-232 Support | Serial control over HDBaseT |
| Power Input | DC 5.3V via included adapter (supports Power over HDBaseT) |
| Power Consumption | 5 W max |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Humidity | 0–80 % RH (non-condensing) |
| Dimensions (L x W x H) per unit | 17.2 cm x 10.4 cm x 2.5 cm |
| Weight per unit | 0.38 kg |
| Cable Requirements | Cat5e, Cat6 or Cat6a (recommended for 4K) |
| Included Accessories | Power adapter, IR receiver, IR emitter, RS-232 terminal block, mounting brackets |
| Maintenance and Cleaning | Use a dry, soft cloth; avoid liquids and solvents |
| Safety and Compliance | CE, FCC, HDBaseT Alliance certified |
| Repairability | No user-serviceable parts; contact ATEN technical support |
Frequently Asked Questions - CE620-AT-G ATEN
How do I connect the ATEN CE620-AT-G to my HDMI sources?
Connect two HDMI sources to the HDMI input ports on the local unit, then run a single Cat6 cable from the local unit's HDBaseT port to the remote unit's HDBaseT port. Finally connect your display to the remote unit's HDMI output.
Does the CE620 support 4K video?
Yes, the CE620 supports 4K UHD (3840 x 2160) at 60 Hz when using high-quality Cat6a or Cat6 cable. Lower resolutions are also supported.
What is the maximum distance between the local and remote units?
Up to 100 meters over Cat6a cable for 4K signals, and up to 60 meters over Cat5e for lower resolutions.
Can I control the source device from the remote location?
Yes, the CE620 supports IR pass-through and RS-232 commands, allowing you to control the source using an IR remote or serial control.
Does this product require two power supplies?
The CE620 supports Power over HDBaseT (PoH), which can power the remote unit from the local unit using a single power adapter. The included adapter powers the local unit.
How do I switch between the two HDMI inputs?
Use the push button on the local unit or the included IR remote to toggle between input 1 and input 2.
Is the ATEN CE620 hot-swappable?
Yes, HDMI devices can be connected or disconnected while the unit is powered, but it is recommended to switch off power when making permanent wiring changes.
What cable type should I use?
Use Cat5e, Cat6 or Cat6a twisted-pair cable. For 4K and long distances, Cat6a is strongly recommended.
How do I clean the device?
Use a dry, lint-free cloth to wipe the surface. Do not use liquid cleaners, sprays, or abrasive materials.
Is the CE620 repairable?
The internal circuits are not user-serviceable. For any malfunction, contact ATEN authorized service or technical support for repair or replacement.
User questions about CE620-AT-G ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual CE620-AT-G - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CE620-AT-G by ATEN.
USER MANUAL CE620-AT-G ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : CE620-AT-G
Category : Switch