PDIC35 - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PDIC35 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Ceiling Speaker |
| Brand | Pyle |
| Model | PDIC35 |
| Speaker Type | 2-Way |
| Woofer Size | 3.5 inches |
| Tweeter Type | 0.5-inch dome tweeter |
| Impedance | 8 Ohms |
| Power Handling (RMS) | 15 Watts |
| Peak Power | 30 Watts |
| Frequency Response | 80 Hz - 20 kHz |
| Sensitivity | 88 dB |
| Grille Material | Metal |
| Mounting Type | Flush ceiling mount |
| Cutout Diameter | 4.5 inches |
| Outer Diameter | 5.5 inches |
| Mounting Depth | 2.5 inches |
| Weight per Speaker | 1.2 lbs |
| Special Features | Swivel tweeter, paintable grille |
| Installation Method | Spring-loaded clips |
| Cleaning & Maintenance | Wipe with a dry cloth; avoid harsh chemicals |
| Safety Warnings | Do not expose directly to water |
| Spare Parts & Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - PDIC35 Pyle
What is the impedance of the Pyle PDIC35 speaker?
The Pyle PDIC35 features an 8-ohm impedance, making it compatible with most home amplifiers and receivers.
How much power can the PDIC35 handle?
This speaker is rated at 15 watts RMS and can handle 30 watts peak power. We recommend an amplifier delivering 10 to 20 watts per channel for optimal performance.
What size hole do I need to cut for installation?
You will need a 4.5-inch cutout for the PDIC35. The outer diameter is 5.5 inches, so ensure your ceiling or wall has enough clearance.
Can I paint the grille to match my ceiling?
Yes, the metal grille is paintable. Use a high-quality spray paint for best results. Detach the grille before painting and let it dry completely.
Are these speakers suitable for bathrooms or outdoor use?
The PDIC35 is moisture-resistant for damp environments like bathrooms, but it is not fully waterproof. Avoid direct water contact and do not install where it may be exposed to rain.
What is the frequency response of the PDIC35?
The frequency response is 80 Hz to 20 kHz, which delivers clear highs and decent midrange but not heavy bass. For more bass, consider a separate subwoofer.
How do I install the Pyle PDIC35 speakers?
First, cut a 4.5-inch hole. Connect the speaker wires to the terminals, then insert the speaker into the hole and tighten the spring-loaded clips by turning the screws until it is mounted securely.
What gauge speaker wire should I use?
We recommend using 16-gauge speaker wire for runs up to 50 feet and 14-gauge for longer distances to minimize power loss.
Does the speaker have a swivel tweeter?
Yes, the PDIC35 includes a swivel tweeter that allows you to direct high-frequency sound toward your listening area for better imaging.
Can I use these speakers with a ceiling amplifier or a home theater receiver?
Absolutely. With its 8-ohm impedance and moderate power requirements, the PDIC35 works well with most consumer audio systems, including home theater receivers.
User questions about PDIC35 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PDIC35 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDIC35 by Pyle.
USER MANUAL PDIC35 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PDIC35
Category : Loudspeaker