SONY

MEX-V50DT - CD Player SONY - Free user manual and instructions

Find the device manual for free MEX-V50DT SONY in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SONY MEX-V50DT - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Car Audio CD Receiver
Brand Sony
Model MEX-V50DT
Category CD Player
CD Playback Yes (Audio CD, CD-R, CD-RW)
MP3/WMA Playback Yes
Tuner Bands AM/FM
RDS Support Yes
Maximum Output Power 52 W × 4 (peak)
Detachable Faceplate Yes
Display Type Multi-line dot matrix LCD
Audio Features Equalizer presets, Bass/Treble control, Fader/Balance
Connectivity RCA pre-outs (front/rear), Antenna input
Dimensions (approx.) 178 × 50 × 160 mm (1-DIN)
Weight (approx.) 1.3 kg
Power Supply 12 V DC (negative ground)
Care and Cleaning Wipe with a soft, dry cloth; avoid solvents or abrasive cleaners
Safety Fuse rated at 10 A; ensure correct polarity; do not disassemble
Spare Parts and Repairability Consult a qualified service center for repairs; no user-serviceable parts
General Information For use in vehicles with 12 V electrical system; includes remote control and wiring harness

Frequently Asked Questions - MEX-V50DT SONY

How do I set the clock on my Sony MEX-V50DT?
Press the MENU button, then select CLOCK using the rotary knob. Rotate to set hours, press to confirm, then rotate to set minutes. Press MENU to exit.
How do I detach the faceplate?
Press the RELEASE button to unlock the faceplate, then pull it forward and upward. Keep the faceplate in a protective case when removed.
Can I play MP3 files burned on a CD?
Yes, the unit supports playback of MP3 and WMA files on CD-R and CD-RW discs. Ensure the disc is finalized and the files are within the supported bitrate range (32-320 kbps for MP3).
Why is there no sound coming from my speakers?
Check that the volume is not muted or set too low. Verify the fader and balance settings are centered. Also, ensure the speaker wiring is connected securely to the head unit.
How do I program radio presets?
Tune to the desired station, then press and hold one of the number buttons (1-6) for a few seconds until the display flashes. The station is now stored in memory.
What is the auxiliary input for?
The AUX IN jack allows you to connect an external audio device such as a portable music player using a 3.5 mm stereo cable. Press SOURCE repeatedly to select AUX.
How do I reset the unit?
Press the RESET button located on the front panel (behind the faceplate) using a pointed object such as a pen. This restores factory settings and clears any error conditions.
Can I use the MEX-V50DT in a boat or RV?
The unit is designed for 12 V DC negative ground electrical systems, typically found in cars. In boats or RVs with similar electrical systems, it can be used, but verify the voltage and polarity first. Avoid exposure to extreme moisture.
How should I clean the CD player lens?
Use a commercially available CD lens cleaner disc to remove dust. Do not use spray cleaners or insert objects into the unit. For the disc itself, wipe from the center outward with a soft cloth.
What should I do if the faceplate display is dim?
Press the DSPL button to adjust the display brightness or turn the illumination on/off. If the display remains dim, check the dimmer setting and the vehicle's light switch position.

User questions about MEX-V50DT SONY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your CD Player in PDF format for free! Find your manual MEX-V50DT - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MEX-V50DT by SONY.

USER MANUAL MEX-V50DT SONY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SONY

Model : MEX-V50DT

Category : CD Player