IWP-MD C6A/UROTT - Unknown Techly - Free user manual and instructions
Find the device manual for free IWP-MD C6A/UROTT Techly in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | In-wall Cat6A network wall plate |
| Brand | Techly |
| Model | IWP-MD C6A/UROTT |
| Connector type | RJ45 female to internal punch-down block |
| Cable standard | Cat6A / Class EA |
| Frequency range | Up to 500 MHz |
| Data rate support | 10/100/1000 Mbps and 10GBase-T |
| Wiring standard | TIA/EIA 568A and 568B compatible |
| Housing material | High-impact ABS plastic |
| Finish | White matte |
| Dimensions (W x H x D) | 86 x 86 x 25 mm |
| Weight | 40 g |
| Mounting type | Single-gang wall box (standard 60 mm |
| Number of ports | 1 |
| Keystone compatibility | Yes, accepts standard keystone jacks |
| Flammability rating | UL94V-0 |
| Operating temperature | -10°C to +60°C |
| Certifications | RoHS, REACH |
| Power supply | None (passive device) |
| Cleaning and maintenance | Wipe with a dry soft cloth; avoid solvents |
| Repairability | Not user-serviceable; replace the complete unit |
Frequently Asked Questions - IWP-MD C6A/UROTT Techly
What is the Techly IWP-MD C6A/UROTT?
The Techly IWP-MD C6A/UROTT is an in-wall Cat6A network wall plate that provides a clean and professional Ethernet outlet for your premises. It supports data rates up to 10Gbps and is backward compatible with Cat6 and Cat5e.
How do I install this wall plate?
Installation is straightforward: mount the plate to a standard single-gang wall box, connect your Cat6A cable to the punch-down block following the T568A or T568B wiring scheme, then attach the plate with the provided screws. Make sure the cable has at least 5 cm of slack.
Is it compatible with Cat6 cables?
Yes, the plate is backward compatible with Cat6 and Cat5e cables. While it is optimized for Cat6A performance, you can safely use it with lower-category cables and still get full Gigabit speeds.
What is the difference between Cat6 and Cat6A for this plate?
Cat6A supports 10Gbps at 500 MHz up to 100 meters, whereas Cat6 handles 10Gbps only up to 55 meters. With this Cat6A-rated plate, you ensure full 10GBase-T performance over longer cable runs.
Does this plate require a power supply?
No, it is a passive device. It does not need any electrical power; it simply passes the network signal through the copper cables.
What tools are needed for installation?
You will need a wire stripper to prepare the cables, a punch-down tool to terminate wires into the IDC terminals, and a screwdriver to fix the plate to the wall box.
Can I use it for both T568A and T568B wiring?
Absolutely. The punch-down block is color-coded for both T568A and T568B standards. Select the wiring scheme that matches your network and terminate the wires accordingly.
How do I clean and maintain the wall plate?
Use a dry soft cloth to wipe the surface. Do not use water, cleaning chemicals, or abrasive materials, as they may damage the plastic housing and the RJ45 contacts.
Is it suitable for outdoor installation?
No, this wall plate is designed for indoor use only. For outdoor environments, you would need a weatherproof enclosure or a specialized outdoor-rated plate.
What should I do if the port stops working?
First, check the cable termination and re-punch the wires if needed. If the issue persists, test with a known working device. As a last resort, replace the plate because the RJ45 connector cannot be repaired individually.
User questions about IWP-MD C6A/UROTT Techly
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual IWP-MD C6A/UROTT - Techly and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IWP-MD C6A/UROTT by Techly.
USER MANUAL IWP-MD C6A/UROTT Techly
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Techly
Model : IWP-MD C6A/UROTT
Category : Unknown