SDX-Plus-S - AV Extender Smart-AVI - Free user manual and instructions
Find the device manual for free SDX-Plus-S Smart-AVI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | AV Extender |
| Brand | Smart-AVI |
| Model | SDX-Plus-S |
| Technology | HDMI over single Cat5e/6 |
| Video resolution | Up to 1080p@60Hz, 4K@30Hz |
| Maximum distance | Up to 60 meters over Cat6 cable |
| HDMI input | 1 x HDMI Type A female |
| HDMI output | 1 x HDMI Type A female |
| RJ45 link | 1 x RJ45 female for Cat5e/6 cable |
| Power supply | 5V DC, 1A power adapter included |
| Power consumption | < 5 W |
| Dimensions (each unit) | 10.2 x 6.5 x 2.5 cm (4 x 2.6 x 1 in) |
| Weight (each unit) | 180 g (0.4 lb) |
| Operating temperature | 0 to 50 degrees Celsius |
| Storage temperature | -20 to 70 degrees Celsius |
| Housing material | Aluminum metal case |
| HDCP support | HDCP 1.4 compliant |
| LED indicators | Power and link status on each unit |
| Package contents | Transmitter, receiver, 2 power adapters, user manual |
| Maintenance and cleaning | Wipe with a dry, soft cloth; do not use liquid cleaners |
| Safety | For indoor use only; keep away from moisture and heat sources |
| Parts and repairability | No user-serviceable parts inside; contact Smart-AVI support |
Frequently Asked Questions - SDX-Plus-S Smart-AVI
How do I connect the SDX-Plus-S AV Extender?
Connect an HDMI source to the transmitter unit and the display to the receiver unit. Use a Cat5e/6 cable to link the two units via their RJ45 ports. Finally, power both units with the included 5V adapters. The LED indicators will show when power and link are active.
Does the extender require power on both ends?
Yes, both the transmitter and receiver must be powered using the included 5V DC adapters. This ensures reliable signal amplification and HDMI handshake integrity.
What is the maximum distance supported?
The SDX-Plus-S supports HDMI transmission up to 60 meters over a single Cat6 cable. For Cat5e, the recommended distance is about 45 meters.
What video resolutions are supported?
It supports resolutions up to 1920x1080@60Hz and 3840x2160@30Hz. For best results, use quality HDMI cables and proper Category 6 cabling.
Does it support audio over HDMI?
Yes, the extender carries multi-channel audio including LPCM, Dolby Digital, and DTS signals along with the video over the same Cat cable.
Is HDCP content protected?
The SDX-Plus-S is HDCP 1.4 compliant, so it can pass protected content from Blu-ray players, streaming devices, and consoles, provided the source and display also support HDCP.
Can I use this extender with a shielded cable?
Yes, a shielded Cat6 cable is recommended for optimal immunity to interference. The connector must be a standard RJ45 terminated per TIA/EIA-568 wiring.
Does the unit support IR remote passthrough?
No, the standard SDX-Plus-S does not include IR transmission. If you need remote control extension, consider a model with IR support or add an external IR extender.
How do I reset the extender if it stops working?
Disconnect the power adapters from both units, wait 10 seconds, then reconnect them in the order: transmitter first, then receiver. Verify the HDMI cables are secure and the Cat cable is not damaged.
Where can I find the full user manual and support?
The complete user manual is available for free download on notice-facile.com. For technical support, contact Smart-AVI directly through their official website.
User questions about SDX-Plus-S Smart-AVI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV Extender in PDF format for free! Find your manual SDX-Plus-S - Smart-AVI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDX-Plus-S by Smart-AVI.