SY-ADA24007 - Access Point Syba - Free user manual and instructions
Find the device manual for free SY-ADA24007 Syba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Syba |
| Model | SY-ADA24007 |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Interface | 1 x 10/100 Fast Ethernet (RJ-45) |
| Power over Ethernet (PoE) | Supported (802.3af) |
| Security Protocols | WEP, WPA, WPA2 |
| Antenna Type | Internal omnidirectional |
| Antenna Gain | 2 x 5 dBi |
| Mounting Options | Ceiling and wall mount |
| LED Indicators | Power, LAN, WLAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Dimensions (W x D x H) | 150 x 140 x 28 mm |
| Weight | 250 g |
| Power Supply | DC 12V 1A (adapter included) or PoE |
| Management | Web-based interface |
| Modes | Access Point, Repeater, WDS |
| Certification | CE, FCC, RoHS |
Frequently Asked Questions - SY-ADA24007 Syba
How do I reset the Syba SY-ADA24007 to factory defaults?
To reset the device to factory defaults, locate the reset button on the rear panel. Press and hold it for about 10 seconds until the LED indicators flash. The device will reboot and restore all settings to the original out-of-box state.
Does the SY-ADA24007 support Power over Ethernet (PoE)?
Yes, the SY-ADA24007 supports IEEE 802.3af PoE, allowing you to power the device through an Ethernet cable. This simplifies installation in locations where power outlets are not easily accessible. Use a PoE injector or a PoE switch to supply power.
How can I set up the access point?
Connect the device to your network via Ethernet and power it on. Access the web-based management interface by entering the default IP address (usually 192.168.1.1) in your browser. Follow the quick setup wizard to configure SSID, wireless security, and network settings. Detailed instructions are available in the user manual.
What security protocols are supported?
The access point supports WEP, WPA, and WPA2 encryption protocols. For maximum security, it is recommended to use WPA2-PSK with a strong passphrase. This protects your wireless network from unauthorized access.
Can I use this device as a wireless repeater?
Yes, the SY-ADA24007 supports Repeater mode. Through the management interface, you can set the device to Universal Repeater and select an existing wireless network to extend its coverage. This helps eliminate dead zones in your home or office.
How many clients can connect simultaneously?
The exact number depends on network conditions, but typically the device can accommodate up to 30-50 wireless clients. For best performance, keep the number of active users within this range. Heavier traffic may require additional access points.
Does the device support WDS bridging?
Yes, the access point supports WDS (Wireless Distribution System) bridging. This allows you to create a wireless link between multiple access points, expanding your network without running additional cables. Configure WDS settings in the Wireless Mode section of the management interface.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1, with the default username admin and password admin. For security, it is strongly recommended to change these credentials after the initial setup to prevent unauthorized access to the configuration.
How do I update the firmware?
To update the firmware, download the latest version from the official Syba website. Log into the web interface, go to System Settings > Firmware Upgrade, and select the downloaded file. Do not interrupt the process during the update, as this may damage the device.
How can I improve the wireless signal strength?
To improve signal coverage, place the access point in a central, elevated position away from thick walls and metal objects. Avoid interference from other electronic devices like microwave ovens. You can also adjust the antenna orientation or use PoE to place the unit at an optimal location. For extended coverage, consider using Repeater or WDS modes.
User questions about SY-ADA24007 Syba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual SY-ADA24007 - Syba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SY-ADA24007 by Syba.
USER MANUAL SY-ADA24007 Syba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Syba
Model : SY-ADA24007
Category : Access Point