HK400000673 - Video projector 3M - Free user manual and instructions
Find the device manual for free HK400000673 3M in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | 3M |
| Model | HK400000673 |
| Display Technology | DLP |
| Native Resolution | 1024 x 768 (XGA) |
| Brightness | 3000 ANSI lumens |
| Contrast Ratio | 2000:1 |
| Lamp Life | 3000 hours (normal), 4000 hours (eco) |
| Keystone Correction | Vertical: +/- 40 degrees |
| Lens | Manual zoom and focus |
| Connectivity | HDMI, VGA, S-Video, Composite, Audio in/out |
| Built-in Speakers | 2 x 3W |
| Weight | 2.7 kg |
| Dimensions (W x D x H) | 280 x 220 x 80 mm |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 350W (typical) |
| Standby Power | Less than 1W |
| Operating Temperature | 5-35°C |
| Maintenance | Clean air filter regularly |
| Security Features | Password lock, Kensington slot |
| Spare Parts | Replacement lamp and air filter available |
Frequently Asked Questions - HK400000673 3M
How do I clean the air filter?
To clean the air filter, turn off the projector and unplug it. Locate the filter cover on the side or bottom, remove the filter, and gently rinse it with water. Let it dry completely before replacing. Do not use a vacuum cleaner as it may damage the filter. It is recommended to clean the filter every 500 hours of use. For more details, see the Maintenance section of the manual.
What is the recommended lamp replacement interval?
The lamp should be replaced when it reaches the end of its life or becomes dim. The typical lamp life is 3000 hours in normal mode and 4000 hours in eco mode. If the lamp indicator lights up, replace the lamp immediately. Use only a genuine 3M replacement lamp to maintain performance and safety.
How can I connect a laptop to the projector?
To connect a laptop, use a VGA or HDMI cable. Connect one end to the laptop's video output and the other to the corresponding input on the projector. Then select the correct input source using the Source button on the projector or remote control. If you need audio, connect a separate audio cable to the audio input.
How do I adjust the keystone correction?
If the projected image is trapezoid-shaped, use the Keystone Correction function. Press the Menu button, navigate to the Setup menu, and select Keystone. Use the arrow keys to adjust the vertical or horizontal keystone until the image is rectangular. Most projectors have a vertical correction range of +/- 40 degrees.
Why is the projector not turning on?
First, check that the power cord is connected securely and the wall outlet is working. Make sure the Power switch is on. If the projector still does not turn on, the lamp may be faulty or the thermal protection may have activated. Wait a few minutes for the projector to cool down. If the problem persists, check the status indicator lights to diagnose the issue.
Is there a password lock feature?
Yes, this projector includes a password lock function. To enable it, go to the Security menu and set a password. Once activated, the projector will require the password to power on or to access the menu. This helps prevent unauthorized use.
What are the environmental requirements for operating the projector?
The projector should be used in a well-ventilated area with a temperature between 5°C and 35°C. Avoid placing it in direct sunlight or near heat sources. Humidity should be kept below 80%. Ensure there is at least 30 cm of clearance around the projector for proper airflow.
How do I set up the projector for a presentation?
Place the projector on a stable surface or mount it on a ceiling. Connect your video source and power. Turn on the projector and adjust the focus and zoom to get a clear image. Use the Keystone Correction to fix any distortion. Press the Source button to select the correct input. Finally, adjust the volume and use the Blank function to hide the image when needed.
Can I use the projector to play content from a USB drive?
This depends on the model. If your projector has a USB port, you can connect a USB drive and play media files directly. Check the manual for supported file formats. For this model, it is recommended to use the HDMI or VGA input for reliable playback.
Where can I find the serial number of the projector?
The serial number is usually located on a label on the bottom or side of the projector. You may need to access the service menu or check the original box. Keep it handy for warranty service or when contacting customer support.
User questions about HK400000673 3M
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual HK400000673 - 3M and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HK400000673 by 3M.
USER MANUAL HK400000673 3M
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : 3M
Model : HK400000673
Category : Video projector