CRDSNU-25 - Pneumatic cylinder Festo - Free user manual and instructions
Find the device manual for free CRDSNU-25 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic cylinder |
| Brand | Festo |
| Model | CRDSNU-25 |
| Bore Size | 25 mm |
| Stroke Range | 5 to 500 mm (typical) |
| Operating Pressure | 1 to 10 bar |
| Operating Temperature | -20 to 80 °C |
| Pneumatic Connection | G1/8 |
| Cushioning | Adjustable at both ends |
| Piston Rod Diameter | 10 mm |
| Theoretical Force (Pushing) at 6 bar | Approximately 295 N |
| Theoretical Force (Pulling) at 6 bar | Approximately 247 N |
| Function | Double-acting |
| Anti-rotation | Yes, with internal guide |
| Piston Rod End | External thread |
| Maintenance | Low maintenance; occasional lubrication |
| Cleaning | Wipe with damp cloth; avoid solvents |
| Spare Parts | Seals and rod wiper replaceable |
| General Information | Compact design, suitable for various automation applications |
Frequently Asked Questions - CRDSNU-25 Festo
What type of cylinder is the Festo CRDSNU-25?
The Festo CRDSNU-25 is a double-acting pneumatic cylinder with a 25 mm bore and a compact design.
What is the operating pressure range of the CRDSNU-25?
The recommended operating pressure is between 1 and 10 bar. For optimal performance, keep the pressure within this range.
What is the maximum working temperature?
The cylinder can operate in temperatures from -20 °C to +80 °C. Ensure that the environment and air supply are within these limits.
How do I mount the CRDSNU-25 cylinder?
The cylinder can be mounted using its mounting threads or with accessories. Fix it in a position that allows free movement of the piston rod and ensure proper alignment.
How do I adjust the cushioning at the cylinder ends?
The cylinder features adjustable cushioning screws at both ends. Turn the screws clockwise to reduce cushioning and counterclockwise to increase it, then lock them in place.
What maintenance does the CRDSNU-25 require?
The cylinder is low-maintenance. If the air is filtered and lubricated, use a suitable oil for lubrication. Periodically check for leaks and damage.
How should I clean the cylinder?
Wipe the external surfaces with a damp cloth. Do not use aggressive solvents or cleaners that could damage the seals or surface.
What should I do if the cylinder leaks?
Check the air connections and seals. Tighten any loose fittings. If the leak persists, replace the damaged seals according to the service instructions.
Can the CRDSNU-25 be repaired?
Yes, the cylinder is serviceable. Spare parts such as seals and rod wipers are available and can be replaced by a qualified technician.
What is the theoretical force of the cylinder at 6 bar?
At 6 bar, the theoretical pushing force is approximately 295 N and the pulling force is approximately 247 N. Actual force may vary due to friction.
User questions about CRDSNU-25 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pneumatic cylinder in PDF format for free! Find your manual CRDSNU-25 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRDSNU-25 by Festo.
USER MANUAL CRDSNU-25 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : CRDSNU-25
Category : Pneumatic cylinder