2020PLMK-1 - Uncategorized OPTEX - Free user manual and instructions
Find the device manual for free 2020PLMK-1 OPTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Infrared (PIR) Motion Detector |
| Brand | Optex |
| Model | 2020PLMK-1 |
| Detection Method | Passive Infrared (PIR) sensing technology |
| Maximum Detection Range | 12 meters (39 feet) with 90° detection angle |
| Adjustable Sensitivity | Yes, via built-in potentiometer |
| Power Supply | DC 12V – 24V (±10%) |
| Current Consumption | Less than 15 mA at 12V DC |
| Output Signal | Relay output (NC/NO), 30V DC max., 0.2A max. |
| Operating Temperature | -20°C to +60°C (-4°F to 140°F) |
| Dimensions (W x H x D) | 120 mm x 60 mm x 40 mm (4.7 x 2.4 x 1.6 inches) |
| Weight | 150 g (5.3 oz) |
| Mounting Type | Wall or ceiling mountable with adjustable bracket |
| Wireless Connectivity | Wired connection only |
| Tamper Protection | Built-in tamper switch for anti-masking |
| Environmental Protection | IP54 rated for dust and water splash resistance |
| Maintenance | Clean the lens with a soft, dry cloth at regular intervals |
| Repairability | Modular design – sensor module and circuit board replaceable |
| Safety Compliance | CE, RoHS compliant |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - 2020PLMK-1 OPTEX
What is the detection range of the Optex 2020PLMK-1?
The detection range is up to 12 meters with a detection angle of 90 degrees when mounted at a recommended height of 2.2 meters.
What type of power supply does this motion detector require?
It operates on a DC 12V to 24V power supply. The current consumption is typically less than 15 mA at 12V DC.
Can the Optex 2020PLMK-1 be used outdoors?
Yes, the detector has an IP54 rating, meaning it is protected against limited dust ingress and water splashes, making it suitable for covered outdoor or harsh indoor environments.
How do I connect the output wires to an alarm system?
The detector provides a relay output with both Normally Open (NO) and Normally Closed (NC) terminals. Connect these to the corresponding inputs of your alarm control panel or security system.
What does the LED indicator on the device signify?
The built-in LED lamp flashes when the detector senses movement. During normal operation, the LED can be disabled via jumper settings to maintain discretion.
How do I adjust the sensitivity of the motion detector?
The sensitivity level can be adjusted using the potentiometer located on the circuit board. Turn it clockwise to increase sensitivity and counterclockwise to reduce it.
Is the device tamper-proof?
Yes, it features a built-in tamper switch that triggers a tamper alarm if the cover is removed or if the device is forcibly dismounted from the installation surface.
What maintenance is required for the Optex 2020PLMK-1?
Regularly clean the lens with a soft, dry cloth to avoid dust accumulation that could impair detection. Do not use solvents or abrasives as they may damage the lens coating.
Can I replace parts if the detector becomes faulty?
Yes, the device has a modular design, allowing replacement of the sensor module, circuit board, or other components. Consult the manual for detailed repair procedures or contact an authorized service center.
Is the Optex 2020PLMK-1 compatible with standard security alarm panels?
Yes, it uses a standard relay output (30V DC, 0.2A maximum) that is compatible with most alarm control panels and security systems. Ensure the output power does not exceed the ratings.
User questions about 2020PLMK-1 OPTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 2020PLMK-1 - OPTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2020PLMK-1 by OPTEX.
USER MANUAL 2020PLMK-1 OPTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OPTEX
Model : 2020PLMK-1
Category : Uncategorized