CLW-DIMFLVEX-P-DA - Variateur d'intensité lumineuse Crestron - Free user manual and instructions
Find the device manual for free CLW-DIMFLVEX-P-DA Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Box Dimmer |
| Brand | Crestron |
| Model | CLW-DIMFLVEX-P-DA |
| Category | Lighting Control / Dimmer |
| Voltage Rating | 120 VAC, 60 Hz |
| Incandescent Load Capacity | Up to 400 W |
| LED/CFL Load Capacity | Up to 300 W |
| Compatible Loads | Dimmable LED, CFL, Incandescent, Halogen |
| Control Interface | Push button and remote via infiNET EX |
| Wireless Communication | Crestron infiNET EX protocol |
| Mounting Type | Standard US wallbox (single gang) |
| Dimensions (W x H x D) | 2.25 x 4.13 x 1.91 in (57 x 105 x 49 mm) |
| Weight | 4.2 oz (119 g) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Certifications | UL/cUL listed, FCC Part 15 |
| Safety | Complies with US electrical safety standards |
| Maintenance | Periodic check of wiring connections |
| Cleaning | Wipe with soft dry cloth |
| Warranty | Limited 2-year warranty |
| Spare Parts & Repairability | Repairable by authorized Crestron technicians |
Frequently Asked Questions - CLW-DIMFLVEX-P-DA Crestron
How do I install the CLW-DIMFLVEX-P-DA dimmer?
Installation should be performed by a qualified electrician. Turn off power at the circuit breaker, connect the hot, neutral, and load wires to the corresponding terminals, and mount the dimmer into a standard single-gang wallbox. For detailed steps, refer to the wiring diagram in the manual.
Can this dimmer control LED bulbs?
Yes, the CLW-DIMFLVEX-P-DA is compatible with dimmable LED and CFL bulbs. It supports leading-edge and trailing-edge phase control, ensuring smooth dimming without flicker.
Does the dimmer require a neutral wire?
Yes, for proper operation with LED loads, a neutral wire is required. The dimmer includes a captive neutral lead for connection.
Is it compatible with Crestron smart home systems?
Absolutely. The dimmer communicates via the infiNET EX wireless protocol, allowing integration with Crestron control systems for remote and automated lighting control.
What is the maximum load for incandescent lighting?
The dimmer can handle up to 400 watts of incandescent loads. For LED/CFL, the maximum is 300 watts. Do not exceed these ratings.
Can I use it with 3-way switching?
Yes, when used with a compatible auxiliary switch, the dimmer can be configured for 3-way or multi-location control. Check the manual for supported companion devices.
How do I clean and maintain the dimmer?
To maintain appearance and functionality, wipe the faceplate with a soft dry cloth. Do not use abrasive cleaners or water. Periodically check all wiring connections for security.
What should I do if the dimmer is not responding?
First, verify that the power is on and the load is functional. Check the wireless connection to the control system. If issues persist, perform a factory reset as described in the manual, or contact Crestron support.
Is there a warranty for this product?
Yes, Crestron provides a limited warranty covering defects in materials and workmanship. Warranty terms are detailed in the official documentation.
Can I adjust the minimum brightness level?
Yes, the dimmer offers an adjustable low-end trim to set the minimum brightness for LED/CFL loads, preventing flicker and ensuring compatibility.
User questions about CLW-DIMFLVEX-P-DA Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Variateur d'intensité lumineuse in PDF format for free! Find your manual CLW-DIMFLVEX-P-DA - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLW-DIMFLVEX-P-DA by Crestron.