BP-FD-ACPREP - Panneau d'alarme incendie BLAUPUNKT - Free user manual and instructions
Find the device manual for free BP-FD-ACPREP BLAUPUNKT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Fire alarm control panel |
| Brand | Blaupunkt |
| Model | BP-FD-ACPREP |
| Primary function | Fire detection and alarm control for small to medium installations |
| Number of zones | 2 independent detection zones |
| Power supply | 230 V AC, 50 Hz |
| Backup battery | 24 V DC rechargeable battery (not included) |
| Output relays | Alarm relay and fault relay (potential-free) |
| Built-in sounder | Piezo buzzer ≥ 85 dB at 3 m |
| Indicators | LED for power, alarm, fault, zone status |
| Operating temperature | -10 °C to +55 °C |
| Storage temperature | -20 °C to +65 °C |
| Relative humidity | ≤ 95 % (non-condensing) |
| Dimensions (W x H x D) | 220 mm x 220 mm x 80 mm |
| Weight | 1.2 kg |
| Housing material | Flame-retardant ABS plastic |
| Degree of protection | IP30 |
| Installation | Wall-mounting |
| Standards | EN 54-2, EN 54-4 compliant |
| Maintenance | Test system weekly, inspect annually |
| Cleaning | Wipe with a dry, soft cloth |
| Spare parts availability | Fuse, backup battery, control board |
| Repairability | Modular design for easy replacement |
| Certifications | CE-marked |
Frequently Asked Questions - BP-FD-ACPREP BLAUPUNKT
How do I install the BP-FD-ACPREP panel?
Mount the fire alarm control panel on a wall using the fixing holes in the backplate. Ensure the area is clean and dry. Connect the AC power supply and wire the detection zones and output relays as described in the manual. Always disconnect power before wiring.
How many detection zones can be connected?
The BP-FD-ACPREP supports 2 independent detection zones. Each zone can be wired to multiple conventional detectors, but the total loop resistance must stay within the panel's specification.
What type of fire detectors are compatible?
This panel is designed for conventional fire detectors such as smoke, heat, and manual call points. Make sure the detectors are EN 54 compliant and operate within the panel's voltage and current ratings.
How do I reset the panel after an alarm?
Press the reset button on the front panel after ensuring the fire condition has cleared. If the alarm persists, investigate the cause. The panel will return to normal standby mode automatically after reset.
Is a backup battery required?
For compliance with EN 54-4, a backup battery is recommended. Use a 24 V DC rechargeable battery with sufficient capacity (e.g., 7 Ah). The battery is not included and must be installed by a qualified technician.
How can I test the fire alarm panel?
Perform a weekly functional test by pressing the test button or activating a detector. Check that the sounder, LEDs, and relays respond correctly. Annual inspection by a certified fire system engineer is also required.
Can I connect external sounders or strobes?
Yes, the panel includes potential-free alarm relays that can switch external warning devices. Ensure the connected devices are properly rated and powered by a separate supply if needed.
What does a continuous alarm sound indicate?
A continuous alarm usually indicates an active fire condition or a short circuit in the zone wiring. First, verify if there is smoke or heat. If not, check the wiring for faults. The fault relay also activates on open or short circuits.
How should I clean and maintain the panel?
Clean the outer surface with a dry, soft cloth. Do not use water or solvents. Regularly check that all indicators and controls work, and keep ventilation openings clear of dust.
Where can I get spare parts or service?
Spare parts such as fuses, batteries, and control boards are available through Blaupunkt authorized dealers. Repairs should be carried out by qualified service technicians to maintain compliance.
User questions about BP-FD-ACPREP BLAUPUNKT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Panneau d'alarme incendie in PDF format for free! Find your manual BP-FD-ACPREP - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP-FD-ACPREP by BLAUPUNKT.
USER MANUAL BP-FD-ACPREP BLAUPUNKT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLAUPUNKT
Model : BP-FD-ACPREP
Category : Panneau d'alarme incendie