GV-IPSH300 - Surveillance Camera Geovision - Free user manual and instructions
Find the device manual for free GV-IPSH300 Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Geovision |
| Model | GV-IPSH300 |
| Image Sensor | 1/2.7" progressive CMOS |
| Maximum Resolution | 1920 x 1080 (Full HD) |
| Lens | Fixed focal lens, 3.6mm |
| Night Vision | IR LEDs up to 30 meters |
| Field of View | Approximately 90° diagonal |
| Video Compression | H.264 / MJPEG |
| Audio | Two-way audio supported |
| Power Supply | IEEE 802.3af PoE or 12V DC |
| Power Consumption | Max 8W |
| Network Interface | RJ45 10/100 BASE-T |
| Memory Card Slot | MicroSD up to 128GB |
| Weatherproof Rating | IP66 |
| Operating Temperature | -20°C to 50°C |
| Dimensions (W x H x D) | 70 x 70 x 150 mm |
| Weight | 500 g |
| Security Functions | Multiple user access levels with password protection |
| Maintenance | Clean housing with damp cloth; use air blower for lens |
| Repairability | No user-serviceable parts; contact certified technician |
| Mounting Type | Wall or ceiling mounting bracket included |
Frequently Asked Questions - GV-IPSH300 Geovision
How do I access the camera remotely?
To access the camera remotely, configure the IP address and connect the camera to your network. Then use the Geovision GV-Express application or a web browser to view the live feed and manage settings.
Does this camera support Power over Ethernet (PoE)?
Yes, the GV-IPSH300 supports IEEE 802.3af PoE, so you can supply both power and network connectivity through a single Ethernet cable, simplifying installation.
Can I use an SD card for local recording?
Absolutely. The camera has a MicroSD card slot supporting cards up to 128GB. Insert a card to enable local recording and backup when the network is unavailable.
How do I perform a factory reset?
Locate the reset button on the camera (usually near the network port). Press and hold it for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the default username and password?
The default login is admin for the username and admin for the password (unless changed). For security, we strongly recommend changing these after the first login.
How far can the IR night vision reach?
The built-in infrared LEDs provide visibility in complete darkness up to 30 meters, ensuring reliable surveillance even at night.
Is the housing waterproof?
Yes, the camera is rated IP66, making it fully protected against dust and strong water jets, suitable for outdoor installation.
Can I connect a microphone or speaker?
The camera has a built-in microphone and a speaker output, enabling two-way audio communication for real-time interaction.
How to update the firmware?
Download the latest firmware from the Geovision official website, then log into the camera's web interface and navigate to the maintenance section to upload the file. Do not interrupt the power during the update.
The camera is not showing video, what should I check?
First verify that the Ethernet cable and PoE connection are secure. Ensure the camera's IP address is correctly configured and reachable. Also check if the firmware is up to date and that the lens is free from obstructions.
User questions about GV-IPSH300 Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual GV-IPSH300 - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-IPSH300 by Geovision.
USER MANUAL GV-IPSH300 Geovision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Geovision
Model : GV-IPSH300
Category : Surveillance Camera